Download Analog Way SMS100 Smart Scaler User Manual w

4) TECHNICAL DESCRIPTION
• FRONT PANEL
COMPUTER
: COMPUTER input selection.
COMPOSITE 1
: COMPOSITE 1 input selection (C.V1).
COMPOSITE 2
: COMPOSITE 2 input selection (C.V2).
S.VIDEO 1
: S.VIDEO 1 input selection.
S.VIDEO 2
: S.VIDEO 2 input selection.
RGB & COMPONENT
: RGB / COMPONENT (R-Y, Y, B-Y) input selection.
FREEZE
: Freeze the displayed image.
CONTROL : Allows to select items in LCD menu.
EXIT MENU
: Allows to exit from an LCD menu.
ENTER
: Allows to validate a selected item.
ON / OFF
: AC power switch (O = OFF, I = ON).
• REAR PANEL
POWER INPUT
: Standard IEC connector (100-250VAC, 1A, 50-60Hz).
REMOTE RS-232
: Standard remote control on DB9 Female connector.
COMPUTER INPUT
: Computer (PC, MAC, WORKSTATION) input on HD15 Female connector.
ROOM +12Vdc TRIGGER
: A Room command output (3.5 mm JACK female) controlled by the AC main
switch. When you switch ON your SMART SCALER ™ the ROOM output
is activated (+12 Vdc trigger), which allows to control external functions such
as Up/Down screen, or switching ON your projector.
VIDEO INPUTS
C.V 1
: COMPOSITE 1 video input on BNC connector.
C.V 2
: COMPOSITE 2 video input on BNC connector.
S.VIDEO 1
: S.VIDEO 1 (Y/C) input on 4 pin mini DIN connector.
S.VIDEO 2
: S.VIDEO 2 (Y/C) input on 2 x BNC connectors.
RGB SYNC / R-Y, Y, B-Y
: RGB/S or YUV (COMPONENT) video inputs on 3 or 4 BNC connectors.
DISPLAY OUTPUT
PAGE 6
: DATA output (RGB HV or RGB.S) on 4 or 5 BNC connectors.
ANALOG WAY
SMS100 - ED 07/01