Download MaxPac X-Class User Manual

Transcript
MaxPac Single/Dual/Triple-Screen 8230 XRA1/2/3 User Operation and Maintenance Guide
Figure 4-68
73
Figure 4-69
2) Gently pull on the magazine handle to extract the magazine from the inner chassis (Figure 4-70).
Figure 4-70
Figure 4-71
3) In order to replace an individual drive, turn each of the four knurled screws attached to the upper
binding bar until they pop out and then remove the upper binding bar (Figure 4-71). Note that the
upper binding bar has tabs that are inserted into slots of the main drive cage.
Figure 4-72
4) Gently grasp the drive in question and pull it out of the magazine (Figure 4-72).