Download DVR User Manual
Transcript
4 1.3.2. IR Remote Controller ① Power : System ON/OFF ② DVR ID Selection ③ Numeric Button : Channel selection or Password input ④ PTZ Button ⑤ Preset Button : Select Preset on PTZ mode ⑥ Focus Button : Focus IN/OUT on PTZ mode 11 ○ 12 ○ ⑨ Direction Button ⑩ Enter Button 13 ○ 14 ○ 15 ○ 16 ○ 17 ○ 18 ○ ⑦ ZOOM Button : Zoom IN/OUT on PTZ mode ⑧ Preset Tour : Tour ON/OFF on PTZ mode ⑪ Menu Button ⑫ Return Button ⑬ Playback Button on Search mode ⑭ Search Button ⑮ Emergency Recording Button 16 Auto-Sequence Button on Live mode ○ 17 Screen Mode Button ○ 18 Backup Button ○ Note User can control multiple DVRs with one IR Remote Controller. In order to control multiple DVRs, each DVR has different Remote ID. (The initial ID is set as “0”.) Note How to setup the ID # in IR Remote Controller 1) Keep pressing ID selection button for about 5 seconds. 2) Set the ID number by pressing numeric button on IR Remote Controller. ID number is available from 000 up to 255. 3) You have to press numeric button as three-digit number format. For example, press “000” for 0, “023” for 23, “234” for 234. User must setup REMOTE ID to match with the ID setting of IR remote controller, if user wants to use it to control DVR. 1.3.3. Tool Bar on Live Mode User can move the mouse pointer to the bottom of the monitor in live mode. Then menu bar will be instantly appeared as below picture.