1
Download SED1354 TECHNICAL MANUAL
Transcript
Epson Research and Development Vancouver Design Center Page 3 1354PWR The 1354PWR Software Suspend Power Sequencing Utility enables or disables the SED1354 software suspend mode and LCD. Refer to the section titled “LCD Power Sequencing and Power Save Modes” in the SED1354 “Programming Notes and Examples” manual, document number X19A-G-002-xx. Also, refer to the SED1354 “Functional Hardware Specification,” document number X19A-A-002-xx for further information. The 1354PWR display utility must be configured and/or compiled to work with your hardware platform. Consult documentation for the program 1354CFG.EXE which can be used to configure 1354PWR. This software is designed to work in both embedded and personal computer (PC) environments. For the embedded environment, it is assumed that the system has a means of downloading software from the PC to the target platform. Typically this is done by serial communications, where the PC uses a terminal program to send control commands and information to the target processor. Alternatively, the PC can program an EPROM, which is then placed in the target platform. Some target platforms can also communicate with the PC via a parallel port connection, or an Ethernet connection. SED1354 Supported Evaluation Platforms 1354PWR has been tested with the following SED1354 supported evaluation platforms: • PC system with an Intel 80x86 processor. • M68332BCC (Business Card Computer) board, revision B, with a Motorola MC68332 processor. • M68EC000IDP (Integrated Development Platform) board, revision 3.0, with a Motorola M68EC000 processor. • SH3-LCEVB board, revision B, with an Hitachi SH-3 HD6417780 processor. If the platform you are using is different from the above, please see the SED1354 “Programming Notes and Examples” manual, document number X19A-G-002-xx. Installation PC platform: copy the file 1354PWR.EXE to a directory that is in the DOS path on your hard drive. Embedded platform: download the program 1354PWR to the system. 1354PWR Software Suspend Power Sequencing Utility Issue Date: 98/10/29 SED1354 X19A-B-007-03
