Download iLOGPlus Manual

Contents
1. Introduction
5
1.1 System block diagram
1.2 iLOGPlusPlus units
1.3 Technical characteristics
1.3.1 Absolute maximum ratings
1.3.1 Measurement section
1.3.2 Communication
2. Installation
12
2.1 Mounting
2.2 Wiring using the SCT-04E adaptor
2.2.1 Power supply
2.2.2 Analog inputs
2.2.3 Digital inputs
2.2.4 Digital outputs
2.3 Internet communications interface
2.3.1 10BaseT Ethernet port (iLOGPlus-LAN)
2.3.2 Modem port (iLOGPlus-EDM)
2.3.3 GSM antenna (iLOGPlus-GSM)
2.4 Connecting to a host computer
2.5 Connecting a GSM modem
2.6 Quick setup
2.6 Power on
3. Setup
25
3.1 Entering the menus
3.2 Unit identity
3.2.1 Unit name
3.2.2 Unit description
3.3 Logging parameters
3.3.1 Logging mode
3.3.2 Channel selection
3.3.3 Logging value selection
3.3.4 Logging rate
3.4 Measurement
3.4.1 Analog channels
3.4.2 Pulse counting channels
3.4.3 Digital inputs
3.5 Alarm parameters
3.5.1 Alarm mode
3.5.2 Prealarm limit
3.5.3 Alarm deadband
3.5.4 Alarm delay (Analog channels)
3.5.4 Alarm delay (Digital inputs)
3.6 Communication
3.6.1 Send rate
3.6.2 FIFO send mode
3.6.3 Data send mode
3.6.4 Alarm send mode
3.6.5 TCP/IP parameters
3.6.6 Email parameters
3.6.7 FTP parameters
3.6.8 GSM parameters
3.6.9 Send time synchronisation
ILOGPlus RTU/data logger, User guide V1.0, 2/2008
3