Download User Manual STIM202 Evaluation Kit

Transcript
USER MANUAL
EvaluationTool
STIM202 Evaluation Kit
Figure 4: NI serial driver installation. Installation complete
6.2
Installation of PC software
Install the PC software by running "setup.exe" found on the included memory-stick. Follow the on-screen instructions
to complete the installation. See Figure 5 through Figure 10 for guidance.
The PC software can also be downloaded from the Sensonor support site. Use this site regularly to check for updates.
Figure 5: PC software installation (1 of 6). Installer initialization
DOK333 rev.05
5/20
Jan 2012