Download Data Analysis Software InSight & InSight
Transcript
7 When a program is Halted (950/960/970 only) the following occurs: • Logging continues with the last logged value • 4-20 mA outputs remain unchanged • Sampler control is disabled • Alarm checking is disabled When a program is Program Complete or Ready to Start the following occurs: • No data logging • 4-20 mA outputs stay at last value • No sampler interface • No alarm checking The program status changes to Program Complete when: • A program has been halted for longer than three hours • Complete in that logger. • See 904 meter’s manual for meaning of Program Complete in that logger. Other InSight Features Other InSight features include: • Modem Scheduling - Automate data collection by scheduling multiple loggers for unattended data retrieval at any time of day or night. • Flow Simulator - Lets you perform a wide range of open channel flow calculations. You may select any primary device (including Area/Velocity) and enter a water level value (and velocity value, if needed). InSight will calculate the flow for you. • Program Templates - Store commonly used logger program setups on disk for re-use whenever you wish. • Password Security - For American Sigma loggers that now have the password security feature built in, InSight checks for security settings and prompts for password entry when the user connects to the logger in InSight. After the correct password is entered the user can then: perform all the standard InSight functions, enable or disable password security, change the password, and even retrieve an encrypted readout of the password for decryption by American Sigma Technical Support in those cases where a password has been forgotten. AS041 Rev. 10-1-99 InSight Data Analysis Software