Download PCI-8133 - ADLINK Technology

Transcript
4.6
Control Mode Register
This register controls the counter operation modes and the PWM output
waveform. Counter3 is only for A/B phase mode.
Address: BASE + 0x12h
Attribute: write only
Data Format:
Bit
BASE+ 0x0E
BASE+ 0x0F
7
PE
X
6
PCM
X
5
X
X
4
FTS1
X
3
FTS0
X
2
C2M1
X
1
C2M0
X
0
C1MS
X
C1MS: The mode select bit of counter 1. The input signals of counter 1 are
from PHA1, /PHA1, PHB1 and /PHB1.
C1MS
0
1 (default)
Operation Modes of counter 1
Input Signal is (CCW+CW)
PHA1: CW (Up count pulse)
PHB1: CCW (Down count pulse)
Input Signal is A, B phase encoder
C2M1, C2M0: The mode control bits of counter 2. The input signals of
counter 2 are from PHA2, PHA12, PHB2 and PHB2. There
are four operating modes for counter 2.
28 • Registers
C2M1
C2M0
0
0
0
1
1
0
1
1
Operation Modes of counter 2
PHA2: OUT (Pulse output)
PHB2: DIR (Direction)
PHA2: CW (Up count pulse)
PHB2: CCW (Down count pulse)
A,B phase encoder input
(Digital filter not used)
A, B phase encoder input
(Signals pass through digital filter)