Download ARP2600 V

Transcript
4.3.6 MIDI control
Most of the knobs, sliders and switches on the ARP2600 V can be manipulated with external MIDI
controllers. Before anything else, make sure that the MIDI device that you wish to use is correctly
connected to the computer, and that the sequencer or the ARP2600 V application is correctly configured to receive MIDI events coming from the device.
Every instance of the ARP2600 V receives MIDI events transmitted on a given channel. This reception
channel is defined in a global manner for the synthesizer, either in your sequencer, or in the standalone ARP2600 V application. On the reception channel, the ARP2600 V can receive up to 120 different MIDI controls. It is possible to choose a reception control for each knob. For this, click on the
knob that you wish to control while holding down the Control key. A configuration window appears
and will allow you to choose a MIDI control number. You can also click on the “Learn” button and
move one of your physical MIDI controllers. In this case, the control number will be detected and
configured automatically. To deactivate the MIDI control of a knob, simply uncheck the “Active”
option in the MIDI control window.
MIDI configuration of a knob
ARTURIA – ARP2600 V – USER’S MANUAL
33