Download Latest Products from... RF Control Systems Hand Held Transmitters
Transcript
Farnell Page 493 Date: 01-12-08 time:17:00 RF Control Systems Latest Products from... Contents Hand Held Transmitters Antennas DIN Rail Remote Control Industrial Remote Control Systems Wireless Switching Page 495 494 502 495 See page 494 Antennas See page 495 GPS Antenna See page 501 Remote Control 13 See page 502 C = CYAN M = Magenta Y = Yellow B = Black/UK2 Farnell Page 494 Date: 01-12-08 time:17:00 Electromechanical RF Control Systems DIN Rail Remote Control Hand Held Transmitter Ì Ì Ì Ì Ì Ì 205 Series Hand Held Transmitters Frequency Range 433.92MHz 100m Pocket fob with wall mounting holster 4, 8 and 16 switch options Range: 433MHz up to 100m 2 x 3V Lithium batteries LED indication of transmission Dimensions (WxHxD): 47x96x23mm Compatible Mftrs. List No. Decoders 210-433 204C16-433FR1 Series Order Code 416-8847 240851 A range of rugged radio transmitters for use with any of the 200 series receivers. Each transmitter is supplied with a rugged outer rubber boot and is IP65. Ì Battery Type 2 x AAA (not supplied) Mftrs. Number Description Range (M)Freq (MHz)Compatible Decoders 205C8-525N FM Narrowband (NB) Transmitter 8 Switch 600 434.525 210-525N 205C16-525N 600 434.525 210-525N FM NB Transmitter 8/16 Switch Order Code 1+ 416-8847 74.38 Price Each 5+ 71.74 10+ 69.31 DIN Rail Receiver Decoder 210 Series 419162 Transmitters Order Code 1+ Price Each 5+ 205C8-525N 205C16-525N 109-6124 109-6125 122.29 303.06 116.62 290.38 10+ 112.28 279.61 This DIN rail module performs the radio reception and decoding. It has four output connectors, each with four digital outputs, and displays the output status on LEDs 1-16. DIN rail output modules, such as the 211, 215, 216 and 217 plug into connectors marked 1-4 (connecting cable supplied with output module). NOTE:The 210Rx can only be configured to work with either a handheld 204 transmitter or a DIN rail 200 transmitter. Spectrum Analysers Turn to page 1415 for our range Ì RF receiver and decoder Ì 16 digital outputs Ì 3 timed outputs DIN Rail Transmitter Encoder Dimensions 200 Series This is an easy-to-use, radio transmitter module, which can accept 8 pairs of ‘Volt free’ contacts as inputs via screw terminals. When a contact closure occurs, the 200Tx transmitter will transmit a data packet over the RF link to an associated 210Rx receiver (that has been learnt by the 200Tx). The 200Tx module continually monitors the status of its ‘inputs’. Whenever a change of state is seen on any input, the 200Tx will transmit the status of all inputs. Full configuration instructions are given in the user manual. The transmitter encoder uses EMC compliant radio transmitter modules and complies with ETSI330-220. 13 Ì Up to 8 input channels Ì Volt free contact inputs via screw terminals Ì 12/24V dc supply Ì Range: Up to 200m (433MHz), 1,000m (433MHz Narrow Band), 6,000m (458MHz) Dimensions Storage Temperature High security RF protocol Auto transmit mode Automatic ‘Watchdog’ transmission Supplied with 1⁄4 wave antenna Ì Ì Ì Ì 157x82mm (within DIN Rail) 155x72mm (PCB) -10° to +70°C 0° to +55°C Electrical Characteristics Supply Voltage: 12V Supply Supply Voltage: 24V Supply Supply Current: Quiescent Time from Tx Switch depressed to 210Rx output Time from Tx Switch release to Decoder output Switched Output Voltage (I out = 1mA) Logic Low Logic High Min 10V 21V 200mSecs 0V 0.2V 3.5V 3.8V C = CYAN Operating Temperature Min 10V 21V Typical 12V 24V 50Ω Operating Frequency 433MHz 433MHz Narrow Band 458MHz Power Supply Unit Order Code 416-8859 491-5616 416-8860 120-0969 0° to +55°C Y = Yellow 1+ 78.60 132.27 318.31 20.45 Price Each 5+ 75.29 127.65 309.48 19.65 10+ 72.19 123.31 299.70 18.90 215 Series This DIN Rail module connects directly to any of the 210Rx output connectors and provides 8 relay switches rated 230Vac @ 1A continuous. The only connections required are: Max 16V 30V 150mA 10mA 170mA 200mA 240mA 10mA 250mA 270mA Order Code 416-8823 491-5604 416-8835 120-0969 1+ 78.16 143.27 315.20 20.45 Find it fast online M = Magenta 0.8V 5V 336730 Ì Connection to the 210 receiver via the ribbon cable supplied Ì Connection to each relay via screw terminals provided Power is supplied from the 210Rx module. Price Each 5+ 75.36 139.27 306.47 19.65 W=112 H=77 Within DIN Rail 10+ 72.75 133.66 296.78 18.90 Supply voltage Relay Rating B = Black/UK2 From the 210 Rx Module 1A Continuous 12A Peak 240853 Mftrs. List No. 215R1 494 Max 16V 30V 100mSecs 336729 Operating Frequency 433.92MHz 434.525MHz Narrow Band 458.85MHz Power Supply Unit Typical 12V 24V 25mA 8 Relay Output Module 112x82mm (within DIN Rail) 109x72mm (PCB) -10° to +70°C Electrical Characteristics Supply Voltage: 12V Supply Supply Voltage: 24V Supply Antenna Output Lead Impedance 433MHz/433MHz Narrow Band Version Supply Current: Quiescent Supply Current:Transmitting Data 458MHz Version Supply Current: Quiescent Supply Current:Transmitting Data Storage Temperature Operating Temperature Ì Easy Learn function Ì 230V ac PSU available Ì Supplied with 1⁄4 wave antenna www.farnell.co.uk Order Code 416-8872 1+ 45.88 Price Each 5+ 44.16 10+ 42.34 Prices are in £ sterling & exclusive of VAT Farnell Page 495 Date: 01-12-08 time:17:01 RF Control Systems RCM250 - Mains Receiver Ì Ì Ì Ì This DIN Rail module connects directly to the 210Rx and provides 4 relays rated 230Vac @ 12A peak, 5A continuous.The only connections required are: Ì Connection to the 210 receiver via the ribbon cable supplied Ì Connection to each relay output via screw terminals provided Ì 4 relay outputs rated 5A @230Vac Ì Connects directly to the 210 module Ì No other connections required W=135 H=77 Within DIN Rail Receiver for EnOcean Mains power input for controlling lights etc. Will switch up to 400W tungsten lighting Simple to configure The module requires no other connections. Power is supplied from the 210Rx module. Supply voltage From 210 Rx Module Relay Rating 12A continuous, 12A peak 240854 Mftrs. List No. Order Code 1+ Price Each 5+ 216R1 416-8884 42.51 41.00 10+ 39.57 Electromechanical 4 Relay Output Module 216 Series 492958 Mftrs. List No. Order Code 1+ Price Each 5+ RCM250 151-8024● 32.21 29.72 Signal Survey Tools Wireless Switching EPM100 Ì Survey tool for EnOcean Ì Shows telegram received and signal level Ì Ideal for non-technical installers EPM200 Ì Complete kit with EPM 100 Ì Includes switch (PTM 200) to aid evaluation of range Ì Convenient carry / storage case PTM200 Wireless Transmitter Ì Switch module for EnOcean system Ì Includes generator powered by action of operation Ì No batteries required Ì unique transmission code to eliminate interference Ì Ready for integration into your housing 492971 492875 Mftrs. List No. TCM120 Mftrs. List No. EPM200 Price Each Order Code 151-8018● 1+ 41.36 5+ 38.16 Price Each Order Code 151-8030 5+ 113.58 Antennas TCM110 Repeater Module Ì Repeater to extend range of EnOcean system Ì Automatically receives and re-transmits EnOcean telegrams Ì Extend typical 100M range Short Range 1⁄4 Wave Whip Antennae A range of antennae designed specifically to work with low power short-range devices on 433-434MHz and 800-900MHz bands. As well as optimising the performance of generalpurpose UHF modules, these antennae are ready for use with Easy Radio and other intelligent devices. Ì 1⁄4 wave whip offers better performance and coverage Ì ≤ -17 dB return loss Ì Omni-directional radiation pattern Ì SMA connector type Ì Rugged plastic coating Ì Available in straight or right angle types 492888 Mftrs. List No. TCM 110 1+ 123.10 Price Each Order Code 151-8019● 1+ 59.49 5+ 54.89 Dimensions (LxDia) 144x10mm (434MHz, straight) 105x11mm (900MHz, straight) 142x18mm (434MHz, right angle) 104x19mm (900MHz, right angle) Receiver Modules RM110 Ì EnOcean receiver module Ì Up to two channel control Ì Dimming (PWM) function Ì Simple to set up RM120 All the above features plus: Ì Optional setup as serial data receiver 461050.407338 Frequency Straight 434MHz 900MHz Right Angle 434MHz 900MHz Order Code 1+ Price Each 5+ 10+ 133-8623● 133-8625● 6.33 6.33 6.03 6.03 5.73 5.73 133-8624● 133-8627● 6.33 6.33 6.03 6.03 5.73 5.73 13 492902 Description RCM110 Receiver RCM120 Receiver Mftrs. List No. RCM110 RCM120 Direct Mount Price Each Order Code 151-8020● 151-8022● 1+ 25.17 23.41 5+ 23.23 21.60 700 products added online every week See our pick of the hottest products and latest technologies in ‘What’s New?’ at www.farnell.co.uk RoHS C = CYAN M = Magenta Compliant Non-compliant Y = Yellow B = Black/UK2 08447 11 11 11 A range of direct mount antennas designed for operation with low power, short range telemetry systems. Each antenna has 50 ohm impedance and is manufactured from moulded flexible plastic. The antennas are supplied with either BNC connector or 4mm (M4) screw fixing (connection link to the RF module is generally via a solder tag washer). Fax: 08447 11 11 12 495 Farnell Page 496 Date: 01-12-08 time:17:01 Electromechanical RF Control Systems Antennas - continued 2.4GHz Antennas Direct Mount - continued 1/4 Wave Whip Antenna Ì Standard 1/4 wavelength whip antenna Ì Provides maximum range performance Ì Rugged plastic finish with flexible body Ì Available with M4, BNC or SMA connection Ì Available in 315MHz, 433MHz and 868MHz versions Helical Antenna Ì 1/4 wavelength helical antenna Ì Helical coil antenna for space saving performance Ì Rugged plastic finish Ì Available with M4 or BNC mount Ì Available in 315MHz and 433MHz versions 130-4038 130-4039 A range of quality cost effective antenna for general purpose use at 2.4GHz Compressed Helical Antenna Ì 1/4 wavelength helical antenna Ì Compressed helical miniature coil antenna Ì Rugged plastic finish Ì Available with M4 mount Ì 433MHz only Frequency 315MHz 433MHz 868MHz 1/4 Wave Whip 231x13mm 162x13mm 97x13mm Ì Provides excellent range Ì Robust rubber moulding Ì SMA plug connector Dimensions (L x Dia.) Helical 72x13mm 55x14mm N/A Compressed Helical N/A 35x14mm N/A 248422 Type 315MHz Helical 433MHz Wave Whip Helical Compressed Helical 1⁄4 Wave Whip Helical 1⁄4 Wave Whip 868MHz 1⁄4 Wave Whip 1⁄4 Wave Whip 1⁄4 Wave Whip 1⁄4 Order Code Fitting Price Each 5+ 10+ 1+ 130-4040 450565 25+ M4 120-0974 4.81 4.46 4.24 4.01 M4 M4 M4 BNC BNC SMA 120-0976 120-0977 120-0978 120-0979 120-1005 130-4036● 4.22 4.03 4.03 7.44 7.65 4.49 3.87 3.83 3.83 6.80 7.24 4.18 3.73 3.66 3.66 6.46 6.84 4.08 3.47 3.51 3.51 6.10 6.41 3.96 M4 120-0980 BNC 120-0981 SMA 130-4037● 4.81 8.50 4.49 4.46 7.78 4.18 4.24 7.39 4.08 4.01 6.82 3.96 Description Mftrs. List No. Order Code 2.4GHz Whip with 90 ANT-24G-WHJ-SMA Deg joint 130-4038● 2.4GHz, Mini Helical ANT-24G-HL90-SMA with 90 Deg Joint 130-4039● ANT-24G-DPL-FP 130-4040● 2.4GHz Mini Dipole 1+ Price Each 5+ 10+ 25+ 4.83 4.58 4.51 4.37 4.03 6.02 3.84 5.71 3.77 5.61 3.66 5.45 2.4GHz Whip & Yagi Antennae Whip, Flying Lead Ì Ì Ì Ì +3dB gain For use with any receiver Supplied with wall mounting bracket 2 metre flying lead with BNC plug L=440mm (antenna to base), 190 bracket Note: In order to comply with DTI regulations, any gain antenna MUST NOT be used on a transmitter module 213012 Type 433 MHz Order Code 120-0960 1+ 51.76 Price Each 5+ 10+ 49.52 47.05 25+ 44.44 2.4GHz Whip Antenna Ì 1⁄2 wave whip offers better performance and coverage Ì ≤ -17 dB return loss Ì Omni-directional radiation pattern Ì SMA connector type Ì Rugged plastic coating Ì Adjustable straight and right-angled Ì Dimensions (LxDia): 201x13mm (straight), 180x36mm (right angled) Antenna Ì Ì Ì Ì Ì 13 2.4GHz whip antennae designed to optimise performance of RF designs on the 2.4GHz Worldwide band. They offer ideal solutions for use with either telemetry applications or RF audio and video devices. The robust design offers both right angled and straight connection to SMA. A 2.4GHz YAGI antenna with 7 elements and SMA connector is also available. Standard 1⁄4 Wavelength whip antenna Provides Maximum Range Performance Rugged Plastic finish with Flexible body BNC 90° connection 433MHz Version 2.4GHz YAGI Antenna Ì 2400-2500MHz frequency range Ì 100MHz bandwidth Ì 9dBi gain Ì Vertical or horizontal polarisation Ì 50Ω input impedance Ì 100W maximum power Ì SMA connector Ì 7 elements 407339.461052 Description Whip Antenna YAGI Antenna Order Code 133-8628● 133-8631● 1+ 7.48 37.15 Price Each 5+ 7.17 36.25 10+ 6.81 35.30 SMB Antenna 419187 Mftrs. List No. FLEXI-BNC90-433 Order Code 109-6141 1+ 10.38 Over 480,000 products online Price Each 5+ 10.01 10+ 9.58 The Buccaneer SMB Antenna is a robust and completely waterproof medium gain antenna specifically developed for the 2.4 to 2.5GHz frequency band. Integrating the antenna with a waterproof connector can reduce the total number of connectors in the RF chain, reducing insertion losses, effectively increasing the total system gain. Ì Ì Ì Ì 496 C = CYAN Find it fast online M = Magenta Y = Yellow B = Black/UK2 Dust and Waterproof to IP68 when mated Secure screw thread locking Built-in sealed antenna Mates with SMB Buccnaeer 1193778, 1193779 & 1193780 www.farnell.co.uk Prices are in £ sterling & exclusive of VAT Farnell Page 497 Date: 01-12-08 time:17:02 RF Control Systems IP68, EN60529, when mated -20 to 65°C UL94V-0 PVC EN50021:1999 2.4 - 2.5 GHz Quarter Wavelength 2 dBi Omnidirectional Vertical 50Ω nominal <2 Electromechanical Sealing Operating Temperature Flammability Body Mouldings UV Resistance Frequency Configuration Typical Gain Radiation Polarization Impedance VSWR PCB Mounting Antenna 478241 Description Mftrs. List No. Order Code 1+ IP68 Rated, Bucaneer SMB Antenna PX0407 142-7476● 7.83 Price Each 25+ 50+ 6.97 5.79 433 MHz Yagi Antenna A PCB mounting antennas 460988 Frequency 2.4 GHz HP 2.4 GHz VP 900/1800 MHz 434 MHz Mftrs. List No. Order Code ANT-24G-PAOBHP ANT-24G-PAOBVP ANT-GSMDB-PAOB ANT-433-PAOB 133-0090● 133-0091● 133-0094● 133-0095● 1+ Price Each 5+ 10+ 3.68 4.66 5.30 5.89 3.57 4.54 5.14 5.71 3.47 4.39 5.00 5.56 GSM Embedded Antenna Ì Ì Ì Ì Ì Frequency: 433MHz VSWR: ≤1.5 Gain: 10 dBi Front to back ratio: 14dB Polarization: Vertical or Horizontal Ì Ì Ì Ì Ì Max Power: 150 W Input impedance: 50Ω Connector style: SMA Lead length: 750 mm Support pole: 38-55mm A PCB quad band antenna (850/900/1800/1900MHz) for use with GSM applications. 461076.469091 Mftrs. List No. YAGI-434 Order Code 133-8629● Price Each 5+ 37.62 1+ 41.04 Ì Unity gain Ì 2W Max. power rating Ì VSWR <1:2 Ì Supplied with 150mm RG178 coax cable with MMCX right angled connector Ì Dimensions: 111x22x1.6mm 460987 10+ 34.21 Frequency 850 / 900 / 1800 / 1900 MHz Mftrs. List No. ANT-GSMQB-MMCX Order Code 133-0089● 1+ 4.59 Price Each 5+ 4.34 10+ 4.18 900 MHz Yagi Antenna GSM Embdedded Antenna Ì Ì Ì Ì Ì Embedded GSM antenna Tab mount design 880 - 960 MHz operating frequency Length = 36.6mm Width = 15.2mm 460407 Mftrs. List No. 1513165-1 Ì Ì Ì Ì Ì Ì Ì Ì Ì Ì Frequency: 868 to 914MHz VSWR: ≤1.5 Gain: 10 dBi Front to back ratio: 14dB Polarization: Vertical or Horizontal Max Power: 150 W Input impedance: 50Ω Connector style: SMA Lead length: 600 mm Support pole: 38-55mm Order Code 133-6303● Order Code 133-8630● Price Each 5+ 37.62 1+ 41.04 1+ 2.52 10+ 2.41 GSM Embdedded Antenna Ì Ì Ì Ì Ì 461077.469092 Mftrs. List No. YAGI-869/914 Price Each 5+ 2.46 10+ 34.21 Embedded GSM antenna Surface mount design 880 - 960 MHz operating frequency Length = 37.59mm Width = 11.9mm 460410 Mftrs. List No. 1513259-1 Puck Antenna Ì Panel mounting puck antenna Ì Rugged plastic finish Ì Available with SMA connection Order Code 133-6304● Price Each 5+ 3.01 1+ 3.08 13 10+ 2.96 GPS Embedded Antenna Ì Ì Ì Ì Embedded GPS antenna Surface mount design Height = 6mm Diameter = 16mm 460984 Frequency 868MHz Mftrs. List No. ANTPUK1-868-SMA Order Code 133-0088● 1+ 39.74 Price Each 5+ 38.25 10+ 36.72 460377 Mftrs. List No. 1513152-1 RoHS C = CYAN M = Magenta Compliant Non-compliant Y = Yellow B = Black/UK2 08447 11 11 11 Order Code 133-6301● 1+ 0.91 Price Each 5+ 0.84 10+ 0.81 Fax: 08447 11 11 12 497 Farnell Page 498 Date: 01-12-08 time:17:02 Electromechanical RF Control Systems Antennas - continued Fusca 2.4GHz SMD Antenna Ì Ì Ì Ì Bluetooth Embedded Antenna Ì Ì Ì Ì Ì Embedded Bluetooth™ antenna Surface mount design 2400 - 2500 MHz operating frequency Height = 6mm Diameter = 16mm Smallest 2.4GHz antenna available Ideal for WLAN, Bluetooth etc. Exceptional performance and stability Low cost 460402 Mftrs. List No. Order Code 1513151-1 133-6302● 493289 1+ Price Each 5+ 10+ Description Mftrs. List No. 1.26 1.16 1.12 Fusca 2.4GHz Embedded Antenna A10192-L Mica 2.4 GHz SMD Antenna Price Each 1+ 5+ 2.85 2.33 Order Code 151-8277● Reference Evaluation Boards Ì Ì Ì Ì SMD antenna for 2.4GHz Ideal for WLAN, Bluetooth etc. Small size Exceptional performance and stability Ì Ì Ì Ì Reference boards for Antenova antenna Example of matching and layout Allow fast evaluation of SMD antennas Availbale for Mica, Comate, Rufa, Impexa, GPS & Fusca 493271 Description Mftrs. List No. Mica 2.4GHz Embedded Antenna 3030A5645-01 Order Code 151-8273● Price Each 1+ 5+ 3.90 3.38 Picea 2.4 GHz Swivel Antenna Ì Ì Ì Ì 493291 Whip antenna designed to clip to PCB Avoids need for expensive RF connectors High performance 2.4GHz antenna Ideal for Bluetooth, WLAN, ZigBee etc Description Mica 2.4GHz Evaluation Board Mftrs. List No. MICA REF BOARD Order Code 151-8278● Price Each 1+ 5+ 125.10 118.24 WS3910 GPS Active Antenna High Gain, Low Noise 493274 Description Picea 2.4GHz Embedded Antenna Mftrs. List No. 2010B5771-04 Order Code 151-8274● Price Each 1+ 5+ 4.12 3.60 The WS3910 GPS antenna is unparalleled in quality and performance. It features a custom designed ceramic patch element that minimizes detuning effects caused by adjacent objects. This element, along with a low noise amplifier and SAW filter, enables the WS3910 to provide a consistent, clear signal while minimizing loss-of-lock if GPS conditions are less than ideal. With both a magnetic base and threaded holes for mounting screws, the WS3910 GPS antenna is ideal for vehicle mounted AVL applications. Where other GPS antennas fail, the WS3910’s superior out-of-band rejection and low noise characteristics can provide a reliable signal - which can be critical for improving acquisition times and minimizing outages. Titanis 2.4 GHz Swivel SMA Antenna Ì Ì Ì Ì Ì External antenna with integral groundplane Simple to implement SMA connector Rotates around connector for different polarisation 2.4GHz, ideal for WLAN, Bluetooth, ZgiBee etc. Ì Ì Ì Ì 13 High gain: 28 dB @ 3.3 V Ì High performance LNA (patented) Extremely low noise figure: 0.8 dB Ì Wide voltage input range (2.7 - 5 VDC) Excellent out-of-band signal rejection Ì Excellent low elevation angle coverage Wide range of connector types available 450359 493285 Mftrs. List No. 2010B4844-01 Description Titanis 2.4GHz Embedded Antenna 498 C = CYAN Find it fast online M = Magenta Y = Yellow B = Black/UK2 Order Code 151-8275● Mftrs. List No. WS3910-3M-SMA Price Each Order Code 130-2946● 1+ 40.29 25+ 37.54 Price Each 1+ 5+ 29.04 23.75 www.farnell.co.uk Prices are in £ sterling & exclusive of VAT Farnell Page 499 Date: 01-12-08 time:17:03 RF Control Systems Mftrs. List No. Order Code 1+ 25+ WS3917-3M-SMA 130-2948● 29.17 27.28 Electromechanical WS3911-HR "No-Interference" GPS Antenna with Dual SAW High Rejection Filter Price Each WS3930 Quad Band Cellular & 3G Covert Antenna The WS3911-HR No Interference” GPS Antenna with Dual SAW High Rejection Filter has the industry’s best out-of-band filter performance. The WS3911-HR features ESD circuit protection, a patented two-stage low noise amplifier and a dual SAW high rejection filter. It also features a custom designed ceramic patch element that minimizes detuning effects caused by adjacent objects. The WS3911-HR provides the most consistent, clear GPS signal reception while minimizing loss-of-lock in high-RF fields. Housed in a weatherproof magnetic or screw mount enclosure, the WS3911-HP GPS antenna is ideal for most demanding vehicle mounted GPS applications. Ì Ì Ì Ì Very high rejection dual SAW filter Patented high performance dual LNA High gain: 25.5 dB @ 5 V typ. Low current: 7.5 mA @ 3.3 V typ. Ì Ì Ì Ì 3.1 dB low noise figure 15KV ESD circuit protection Wide voltage input range (2.7 - 5 VDC) Weather proof housing 462500 Mftrs. List No. Price Each Order Code 1+ 25+ WS3911-HR-3M-SMA 134-4628● 46.35 43.09 The WS3930 Covert Quad-band Cellular + 3G Antenna provides exceptional signal reception across public 2G and 3G Cellular wireless networks, virtually everywhere in the word. The antenna is tuned to receive 824-894 MHz (cell), 890-960 MHz (GSM), 1710-1880 MHz (European), and 1850-1990 MHz (N. American) frequencies, as well as 1885-2200 MHz (US & Euro 3G/UMTS/W-CDMA) band. Housed in an ultra-thin, semi-flexible Lexan® covered urethane foam package for covert and dash-mount installations, the WS3930 Quad-band Cellular/3G is the perfect solution for cutting-edge TELEMATICS and M2M platforms. Ì Quad-band Cellular and 3G (UMTS/WCDMA) Reception Ì Ultra-thin, semi-flexible package Ì Embedded, Covert and Dash Mount WS3914 GPS Active Antenna Low Current Ì Easy to install Ì Wide range of connector types available Ì Low price 450380 Mftrs. List No. WS3930-3M-SMA Price Each Order Code 130-2949● 1+ 21.54 25+ 20.10 WS3938 Ultra Compact 2.4 GHz Embedded & Covert Mount Antenna The WS3914 GPS antenna uses high performance advanced circuitry designed to operate on only 2 mA of current - setting a new standard for the industry. Performance is not sacrificed; the antenna still features a custom designed ceramic patch element along with a patented low noise amplifier and SAW filter, enabling the WS3914 to provide a consistent, clear signal while minimizing loss-of-lock even in difficult conditions. The WS3914 antenna is ideal for portable or telematics applications using MONITOR, STANDBY or SLEEP modes, where low power operation is a necessity. Ì Extremely low current: 2 mA @ 2.7 VDC Ì High performance patented LNA Ì Very low noise figure: 1dB Ì Wide range of connector types available Ì Excellent out-of-band signal rejection Ì Wide voltage input range (2.5 - 3.3 VDC) 450375 Mftrs. List No. WS3914-3M-SMA Price Each Order Code 130-2947● 1+ 39.81 25+ 37.15 WS3917 GPS Active Antenna The WS3938 Ultra Compact 2.4 GHz Embedded & Covert Mount Antenna provides exceptional signal reception on the 2.4 GHz ISM band. The WS3938 is composed of an ultra compact semi flexible coated PCB for embedded OEM applications and is also available with a Lexan® covered urethane foam package for dash and covert installations. The WS3938 antenna is ideal for cutting edge TELEMATICS and M2M platforms. Ì Ì Ì Ì High Gain 134-4632 134-4627 2.4 GHz ISM Band reception Ultra-compact, semi-flexible PCB Coated PCB or packaged form factor Embedded, covert and dash mount Ì Easy to install Ì Wide range of connector types available Ì Customization available 13 Applications:Ì 2.4 GHz Based Telematics Ì M2M Wireless Applications using Wi-Fi, Bluetooth, Zigbee and proprietary 2.4 GHz Ì In-Vehicle Covert Installations Ì Wireless Remote Monitoring 462525 Description Covert Mount Embedded Mount The WS3917 GPS antenna is a high value antenna with a wide voltage range, optimum GPS performance, designed for a wide range of GPS devices. The WS3917 antenna is housed in durable PVC plastic for reliability in extreme weather conditions, and using internal magnets or screw mount holes, the antenna can be installed almost anywhere allowing great flexibility. The WS3917 antenna features a high gain (28 dB) low noise amplifier and a SAW filter. With a wide range of connectors and 2.7 to 5 volt operation, the antenna can be used with almost any GPS system available. Ì Voltage range 2.7 - 5 V Ì LNA 28 dB gain typical Ì Low noise figure 1.5dB Ì Great out-of-band signal rejection Ì Magnet or screw mount Mftrs. List No. WS3938-C-15CM-MCX WS3938-E-15CM-MCX Price Each Order Code 134-4627● 134-4632● 1+ 17.94 17.94 25+ 16.58 16.58 Help us to help the environment Ì Large range of connector types Ì Value priced This catalogue has been printed on paper certified from a sustainable source. Please recycle after use. 450376 RoHS C = CYAN M = Magenta Compliant Non-compliant Y = Yellow B = Black/UK2 08447 11 11 11 Fax: 08447 11 11 12 499 Farnell Page 500 Date: 01-12-08 time:17:03 Electromechanical RF Control Systems Antennas - continued WS3954/WS3964 Embedded GPS Antenna WS3947 GPS + Quad Cell/3G/2.4 GHz Combined Covert/Dash or Glass Mount Antenna 130-2957 130-2956 The WS3947 GPS, Quad Cellular, 3G & 2.4 GHz ISM Band antenna is an excellent choice for Telematics systems requiring dependable and highly accurate positioning data, as well as clear and consistent host-to-vehicle communications via Quad band Cellular, 3G or 2.4 GHz ISM Band such as WiFi. The WS3947’s GPS antenna portion has excellent LHCP rejection for less multi-path effects, and it includes a low noise amplifier and a narrow band SAW filter, to provide a consistent and clear GPS signal while minimizing loss-of-lock when GPS conditions are less than ideal. The Quad Cell/3G/2.4 GHz antenna portion is tuned to receive 824-894 MHz (cell), 890-960 MHz (GSM), 170-1880 MHz (European), and 1850-1990 MHz (N. American), as well as 1885-2200MHz (US & Euro 3G/UMTS/W-CDMA) and 2400-2500 MHz (2.4GHz ISM) frequencies. 134-4630 Features:Ì GPS, Quad-band Cellular, 3G & 2.4 GHz band reception Ì Telematics via Wi-Fi, ZigBee, Bluetooth and Proprietary 2.4 GHz Ì Semi-flexible for embedded and covert installations Ì Excellent out-of-band signal rejection Ì Ì Ì Ì Ì Ì Ì High gain active GPS antenna Easy to install Security and Law Enforcement Automotive Navigation Fleet Management & Telematics Asset Tracking Systems Covert/Dash or Glass Mount Installations 462522 Description Glass Mount Covert/Dash Mount Mftrs. List No. WS3947-GM-3M-SMA/SMA WS3947-C-3M-SMA/SMA Order Code 134-4630● 134-4631● Price Each 1+ 25+ 46.68 43.22 46.68 43.22 The WS3954 / WS3964 GPS antennas are ideal for personal GPS applications including handheld computers and PDAs. With an industry leading 2mA current, and compact size, the WS3954 / WS3964 series is perfectly suited for OEM applications. Performance is not sacrificed; the WS3954 / WS3964 features a custom designed ceramic patch element along with a low noise amplifier and SAW filter, enabling these antennas to provide a consistent, clear signal while minimizing loss-of-lock. The WS3954 comes in a compact, square package and the WS3964 comes with a 1.85” mini-ground plane. The antenna design and industry leading low current draw makes the WS3954/64 series is ideal for portable or telematics applications using MONITOR, STANDBY or SLEEP modes. Ì Ì Ì Ì Extremely low current: 2 mA @ 2.7 VDC Ì Available with and without an internal Extremely low noise figure: 1 dB ground plane Excellent out-of-band signal rejection Ì Wide range of connector types available High performance patented LNA 450389 Price Each Mftrs. List No. Order Code 1+ 25+ WS3954-15-MCX-RA WS3964-15-MCX-RA 130-2956● 130-2957● 25.41 25.41 23.56 23.56 WS3957/WS3967 Embedded GPS Antenna WS3950/WS3960 Embedded GPS Antenna 130-2958 130-2955 130-2953 13 The WS3950 / WS3960 GPS antennas are unparalleled in quality and performance, and ideal for embedded mobile applications. They feature a custom designed ceramic patch element that minimizes detuning effects caused by adjacent objects. This element, along with a low noise amplifier and SAW filter, enables these antennas to provide a consistent, clear signal while minimizing loss-of-lock when GPS conditions are less than ideal. The WS3950 comes in a compact square package and the WS3960 comes with a 1.85” mini-ground plane. Where other GPS antennas fail, the WS3950/60s’ superior out-of-band rejection and low noise characteristics can provide a reliable signal, which can be critical for improving acquisition times and minimizing outages Ì 28 dB gain @ 3.3 VDC Ì Available with or without internal ground plane Ì Extremely low noise figure: 0.8 dB Ì Ì Ì Ì Excellent out-of-band signal rejection Wide range of connector types available High performance patented LNA Excellent low elevation angle coverage 130-2959 The WS3957 / WS3967 GPS antenna series is designed for easy integration into a variety of OEM platforms and ideal for handheld GPS devices, mobile asset tracking equipment and GPS clock & timing applications. With its compact size and low price, the WS3957 / WS3967 series is perfectly suited for OEM applications. The WS3957 / WS3967 series features a custom designed ceramic patch element, a two-stage low noise amplifier and a SAW filter, enabling the WS3957/WS3967 series to provide great out-of-band signal rejection performance, consistent and clear signal while minimizing loss-of-lock. The WS3957 comes in a compact square package and the WS3967 comes with a 1.85” mini-ground plane. Ì 2.7 to 5 V operation Ì Wide range of connector types available Ì Available with and without an internal Ì Ideal for embedded applications ground plane Ì Low price Ì Optional cable types and lengths available 450391 Price Each Mftrs. List No. WS3957-15-MCX-RA WS3967-15-MCX-RA Order Code 130-2958● 130-2959● 1+ 21.81 21.81 25+ 20.23 20.23 450387 Mftrs. List No. WS3950-15-MCX-RA WS3960-15-MCX-RA Order Code 130-2953● 130-2955● Price Each 1+ 25+ 22.87 22.04 25.41 23.56 Technical information at your fingertips Over 352,000 technical datasheets available online. Visit www.farnell.co.uk and look for the Tech Info heading in your search results. 500 C = CYAN Find it fast online M = Magenta Y = Yellow B = Black/UK2 WS3967-P Encapsulatable GPS Antenna For Marine & Submarine Applications The WS3967-P Encapsulatable GPS antenna is especially designed for embedding in potting compound. It features a custom de-tuned ceramic patch element to compensate for the potting compound’s detuning effect, as well as ESD circuit protection, a two stage low noise amplifier and a SAW filter, enabling the WS3967-P to provide great out-of-band signal rejection performance, consistent and clear signal while minimizing loss-of-lock. It also comes with a perforated RF shield for complete compound permeation and a 1.88” mini-ground plane for a sharper radiation pattern. The WS3967-P is the embedded GPS antenna of choice for marine, submarine and extreme weather technology OEMs. www.farnell.co.uk Prices are in £ sterling & exclusive of VAT Farnell Page 501 Date: 01-12-08 time:17:04 RF Control Systems Ideal for potted applications Detuned ceramic patch element Perforated RF Can ESD circuit protection Two stage LNA Ì Ì Ì Ì Ì SAW filter 2.7 to 5 V operation Optional cable types and lengths available Wide range of connector types available Low price 450396 Mftrs. List No. Price Each Order Code 1+ 25+ WS3967-P-15-MCX-RA 130-2960● 33.04 30.75 WS4051/WS4061 Low Noise OEM GPS Antenna with Built-in MCX Connector The WS4051 / WS4061 low noise OEM GPS Antenna series with built-in connector is unparalleled in quality and performance, and ideal for embedded OEM applications. The WS4051/WS4061 series features a custom designed ceramic patch element that minimizes detuning effects caused by adjacent objects, as well as a Low Noise Amplifier and a SAW filter that enable these antennas to provide a consistent, clear signal while minimizing loss-of-lock when GPS conditions are less than ideal. Both models come equipped with an MCX connector. The WS4051 comes in a very compact 25 mm square package and the WS4061 comes with a 45.2 mm dia. mini-ground plane. Where other GPS antennas fail, the WS4051/61 antennas’ superior out-of-band rejection and low noise characteristics can provide a reliable signal, which can be critical for improving acquisition times and minimizing outages. Ì Available with and without internal ground plane Ì 28 dB gain @ 3.3 VDC Ì Extremely low noise figure: 0.8 dB Ì Excellent out-of-band signal rejection Ì Built in MCX connector Ì High performance patented LNA 450397 Price Each Mftrs. List No. Order Code 1+ 25+ WS4051-MCX WS4061-MCX 130-2961● 130-2962● 34.73 34.73 32.37 32.37 WS4055/WS4065 Low Current OEM GPS Antenna with Built-in MCX Connector The WS4055 / WS4065 Low Current OEM GPS Antenna series with built-in connector is ideal for personal GPS applications including handheld computers and PDAs. With an industry leading 2mA current, and compact size, the WS4055 / WS4065 series is perfectly suited for OEM applications. Performance is not sacrificed; the WS4055 / WS4065 series features a custom designed ceramic patch element along with a low noise amplifier and SAW filter, enabling these antennas to provide a consistent, clear signal while minimizing loss-of-lock. Both models come equipped with an MCX connector. The WS4055 comes in a very compact 25 mm square package and the WS4065 comes with a 45.2 mm dia. mini-ground plane. The antenna design and industry leading low current draw makes the WS4055/65 series is ideal for portable or telematics applications using MONITOR, STANDBY or SLEEP modes. Ì Ì Ì Ì Extremely low current: 2mA @ 2.7V Extremely low noise figure: 1dB 18 dB gain @ 3.3 VDC (typ.) Excellent out-of-band signal rejection Ì Available with or without internal ground plane Ì Built in MCX connector 450398 Mftrs. List No. WS4055-MCX WS4065-MCX Price Each Order Code 130-2963● 130-2964● 1+ 34.73 34.73 25+ 32.37 32.37 WS4057/WS4067 OEM GPS Antenna with Built-in MCX Connector The WS4057 / WS4067 OEM GPS antenna series with built-in connector is ideal for handheld GPS devices, mobile asset tracking equipment and GPS clock & timing applications. With its compact size and low price, the WS4057/ WS4067 series is perfectly suited for OEM applications. The WS4057/WS4067 series features a custom designed ceramic patch element, a two-stage low noise amplifier and a SAW filter, enabling the WS4057/WS4067 series to provide great out-of-band signal rejection performance, consistent and clear signal while minimizing loss-of-lock. Both models come equipped with an MCX connector. The WS4057 comes in a very compact 25 mm square package and the WS4067 comes with a 45.2 mm dia. mini-ground plane. Ì Available with and without internal ground plane Ì 2.7 to 5.0 V operation Ì 28 dB gain @ 3.3 VDC Ì Ì Ì Ì 1.5 dB noise figure Built in MCX connector Ideal for embedded applications Low price 450401 Mftrs. List No. WS4057-MCX WS4067-MCX RoHS C = CYAN M = Magenta Price Each Order Code 130-2965● 130-2967● Compliant Non-compliant Y = Yellow B = Black/UK2 1+ 24.03 25.57 25+ 22.23 23.66 WS3977 Through-Hole Mount GPS Antenna The WS3977 through-hole mount GPS Antenna provides very high out-of-band rejection performance. It features a custom designed ceramic patch element that minimizes detuning effects caused by adjacent objects. This element, along with a low noise amplifier and SAW filter, enables the WS3977 to provide a consistent, clear signal while minimizing loss-of-lock when GPS conditions are less than ideal. Housed in a compact all-plastic, non-corrosive low profile package. Designed for permanent mount installations, the WS3977 through-hole GPS Antenna is the optimum choice for dependable, clear and consistent GPS signal reception. Where other GPS antennas fail, the WS3977’s great out-of-band rejection and low noise characteristics can provide a very reliable signal - critical for improving acquisition times and minimizing outages. Ì Rugged, compact all-plastic, non-corrosive housing Ì 3⁄4" through-hole mount Ì Voltage range 2.7 - 5 V Ì Ì Ì Ì Electromechanical Ì Ì Ì Ì Ì LNA 28 dB gain typical Low noise figure 1.5dB Good out-of-band signal rejection Value priced 450402 Mftrs. List No. Price Each Order Code 1+ 25+ WS3977-TNC 130-2968● 31.59 29.38 WS1357 Ultra Compact Embedded GPS Antenna The Ultra Compact WS1357 Embedded GPS antenna is most ideal for GPS Enabled mobile phones, PDAs, laptops and portable GPS Handhelds. The WS1357 antenna series features a 13 mm x 13 mm x 3 mm ceramic patch element, ESD circuit protection, a low noise amplifier and a SAW filter, enabling the WS1357 series to provide great out-ofband signal rejection performance, consistent and clear signal while minimizing loss-of-lock, even in difficult conditions, in an extremely small form factor. With its very compact 13 mm x 13mm x 5.3 mm dimensions, the WS1357 antenna series is perfectly suited for OEM handheld platforms applications. Ì 2.7 to 5 V operation Ì Optional cable types and lengths available Ì Available with built-in 30mm ground Ì Other connector types available Ideal for plane (WS1367) embedded applications Ì Low power 18dB design also available Ì Low price (WS1356) 450404 Mftrs. List No. WS1357-15-HFL Price Each Order Code 130-2951● 1+ 25.32 25+ 23.51 WS1857 Compact Embedded GPS Antenna The Very Compact WS1857 Embedded GPS antenna is ideal for GPS Enabled mobile phones, PDAs, laptops and portable GPS Handhelds. The WS1857 antenna features an 18 mm x 18 mm x 4 mm ceramic patch element, ESD circuit protection, a two stage low noise amplifier and a SAW filter, enabling the WS1857 to provide great out-of-band signal rejection performance, consistent and clear signal while minimizing loss-of-lock, even in difficult conditions, in a very small form factor. With its very compact 18 mm x 18 mm x 7 mm dimensions, the WS1857 antenna is perfectly suited for OEM handheld applications. Ì 2.7 to 5 V operation Ì Available with built-in ground plane (WS1867) Ì Built-in MCX ground plane also available (WS2057) Ì Ì Ì Ì 13 Optional cable types and lengths available Other connector types available Ideal for embedded applications Low price 450406 Mftrs. List No. WS1857-15-MCX-RA Price Each Order Code 130-2952● 1+ 26.12 25+ 24.42 WS3997 Low Profile Surface Mount GPS Antenna The WS3997 surface mount GPS Antenna provides very high performance in a very small form factor. It features a custom designed ceramic patch element that minimizes detuning effects caused by adjacent objects. This element, along with a low noise amplifier and SAW filter, enables the WS3997 to provide a consistent, clear signal while minimizing loss-of-lock when GPS conditions are less than ideal. The WS3997 is housed in a very compact all-plastic, non-corrosive low profile package. Designed for permanent mount installations, the WS3997’s thru surface connector provides the lowest in-vehicle profile. 08447 11 11 11 Fax: 08447 11 11 12 501 Farnell Page 502 Date: 01-12-08 time:17:04 Electromechanical RF Control Systems Antennas - continued Industrial Remote Control Systems WS3997 Low Profile Surface Mount GPS Antenna - continued ‘Rolling-Code’ Keyfob System 2 Channel Truly is the optimum choice for dependable, clear and consistent GPS signal reception. The WS3997 comes with an MCX jack connector, and a flying cable option is also available. Ì Extremely compact all-plastic, weather proof, non-corrosive housing Ì Lowest external profile Ì Lowest in-vehicle connector profile Ì Ì Ì Ì The ‘Rolling-Code’ keyfob system is a high security, high quality radio system at an exceptional price. The system is supplied complete with one keyfob. Simply supply power, connect load to relay output and the system is ready to operate. Pressing the appropriate button on the transmitter activates the corresponding relay in the receiver. Ì High security rolling-code system, self learning Ì 2 channels Ì Up to 150m range with external aerial Ì Momentary relay outputs Ì 433MHz operation Ì No license required Small mounting holes Large, high performance patch element Voltage range 2.7 - 5 V LNA 28 dB gain typical 450407 Mftrs. List No. Price Each Order Code 1+ 25+ WS3997-MCX 130-2969● 31.02 29.01 Antenna PCB Mount Terminal The SCRTM4RA is a PCB mounting terminal providing a simple method of attaching a low cost 4mm Screw thread antenna to a PCB. Transmitter Receiver Ì Keyfob size Ì 12V battery, type 23A Ì IP40 rated Ì 12-24V dc (115V/230V ac optional) Ì Relays rated at 1A@24V dc, 0.5A@115V Receiver H=190, W=113, D=65 Keyfob transmitter H=50, W=37, D=15 ac Ì Optional external aerial on 3m cable for extended range 419188 Mftrs. List No. SCRTM4RA Order Code 1+ Price Each 5+ 109-6142 0.72 0.69 10+ 0.66 Transmitter Supply voltage Frequency Operating range Weight 12V battery, type 23A 433MHz Up to 150m (using external aerial) 20g Receiver Supply voltage 12-24V dc (115V/230V ac optional) Relay rating 1A@24V dc, 0.5A@115V ac Frequency 433.92MHz Weight 200g 338588 Surface Mount Ceramic Antennas 392-8070 "Rolling-Code" System 2 Ch Keyfob 2 CH Keyfob, Veneered 392-8056 392-8081 Order Code 120-1693● 130-2526● 130-2527● 1+ 74.20 19.53 29.03 Price Each 5+ 71.34 17.42 27.45 10+ 68.68 15.84 25.34 The "Genie" System 392-8093 392-8068 The "Genie" keyfob radio controlled system is a low cost, high security, high quality radio system for domestic applications. The system is supplied complete with one keyfob; simply apply power, connect load to relay output/s and system is ready to operate. Pressing the appropriate button on the transmitter activates the corresponding relay in the receiver. A range of some of the smallest surface mount Bluetooth/WLAN antennas. Ì High Gain of 4 dBi Ì Ceramic antennas optimized for 433MHz, and 870MHz. Ì New 900/1800MHz dual-band antenna ideal for mobile phones. Ì Bluetooth compatible 2.45MHz antenna, in both long and short versions Ì Environmentally sound - manufactured using low-temperature co-fired ceramic (LTCC) with lead free terminations Ì Operating temperature: -55°C to 125°C Description 433MHz Antenna 870MHz Antenna 2.4GHz Buetooth Antenna 0.9/1.8/1.9GHz Triple Band Antenna + IPEX 0.9/1.8/1.9GHz Triple Band Antenna + MMCX ANTENNA, 5.3 X 2.0, 2.45GHZ ANTENNA, 3.2 X 1.6, 2.45GHZ ANTENNA, 12.0 X 4.0, 433MHZ Order Code Working Frequency Bandwidth Gain (dB) Impedance 392-8056 MHz433 20MHz 0.5 50Ω 392-8068 MHz900 100MHz 1.5 50Ω 392-8093 GHz2.45 ≥100MHz 1.2 50Ω 772-6082 GHz1.9 – 0.5 50Ω 772-6090 GHz1.9 – 0.5 50Ω 128-2672 128-2673 128-2674 GHz2.45 GHz2.45 MHz433 >100MHz >100MHz ≥100MHz 4 3.1 0.5 50Ω 50Ω 50Ω 236430 13 Mftrs. List No. 431312120043 431111900087 431311100245 431333000919 431333001919 431115300245 431171200245 431112920043 Order Code 392-8056● 392-8068● 392-8093● 772-6082● 772-6090● 128-2672● 128-2673● 128-2674● 1+ 11.00 4.87 3.72 8.96 12.40 2.14 1.65 4.82 Price Each 10+ 9.46 3.48 2.47 6.97 9.65 1.42 1.09 3.35 100+ 8.80 3.39 2.22 6.23 8.62 1.27 0.98 2.99 Coming soon Register your interest for items that are ‘Coming Soon’ at www.farnell.co.uk and we’ll email you to let you know that they’re in stock. 502 C = CYAN Find it fast online M = Magenta Y = Yellow B = Black/UK2 General Features: Ì 2 channels Ì High security rolling-code system, self learning Ì Range of up to 150 metres (using external aerial) Ì Momentary/Latching/Timed relay outputs Ì 433MHz operation Ì No licence required Receiver Ì Enclosure IP55 rated Ì 240V ac (12V ac/dc and 110V ac optional) Ì Dimensions: 140 x 110 x 80mm Ì Weight: 200g Ì Momentary or latching relay outputs, DIP switch selectable Ì Channel 1 = C/O contacts, 2 Channel = NO contacts Ì Built-in timer function, DIP switch selectable, for 5 mins, 15 mins or 30 mins Ì Heavy duty 10A relay contacts for direct switching without additional circuitry Ì Optional external aerial for extended range of up to 150 metres Keyfobs Ì Dimensions: 50 x 37 x 15mm Ì 2 buttons Ì 12V battery, Type 23A Ì Weight: 20g Ì Available in black or veneered finish Headlamp Transmitter Ì Fixes directly to vehicle headlamp Ì Remotely operates receiver when main beam is flashed Ì Ideal when using remote to switch on driveway lights 450287 Description "Genie" Keyfob System 2 Ch Keyfob 2 CH Keyfob, Veneered www.farnell.co.uk Mftrs. List No. GENIES/2/30/240 DEA/273 DEA/273L Order Code 130-2525● 130-2526● 130-2527● 1+ 145.69 19.53 29.03 Price Each 5+ 131.96 17.42 27.45 10+ 121.41 15.84 25.34 Prices are in £ sterling & exclusive of VAT