Download User Manual - EndRun Technologies

ENDRUN
TECHNOLOGIES
2
Chapter
Basic Installation
T
his chapter will guide you through the most basic checkout and physical installation of your Tempus Gntp. Subsequent chapters and appendices will give you
the information needed to configure your installation for the maximum performance in your operating environment. General NTP client setup instructions will also
be supplied to get you started using your Tempus Gntp quickly.
Basic familiarity with TCP/IP networking protocols like ping, telnet and ftp is required. Though some familiarity with Linux or other Unix-like operating systems would
be helpful, it is not essential. If you satisfy these conditions, the instructions provided
herein should guide you to a successful installation.
Checking and Identifying the Hardware
Unpack and check all the items using the following check list. Contact the factory if
anything is missing or damaged.
The Tempus Gntp Hardware Pack (part # 4008-0000-000 or # 4008-variant) contains:
q
Tempus Gntp (part # 3012-0000-000 or # 3012- variant)
q
Tempus Gntp User’s Manual (part # USM3012-0000-000)
q
IEC 320 AC Power Cord (part # 0501-0003-000)
(This part will not be present if using the DC power option.)
q
DB-9F to DB-9F Null Modem Serial I/O Cable (part # 0501-0002-000)
q
RJ-45 to RJ-45 CAT-5 patch cable, 2 meters (part # 0501-0002-000)
q
Antenna/cable assembly (part # 0501-0000-000)
5
Tempus Gntp User’s Manual