Download instruction-manual-r..

6.0
6.1
APPENDICES
Specifications
General
Water in Oil range
Minimum sample flow rate
Resolution
Temperature stability
Temperature sensor
Temperature compensation range
Shipping weight
0.00 to 50.00%
4 USGPM for oil (no wax)
9 USGPM for condensate
0.001% water
0.0015% water/°C
1000 Ohm platinum RTD
32°F-300°F (0°C-150°C)
Approx. 40 Lbs (Varies by model)
Mechanical
Construction material
Maximum working pressure
Maximum fluid temperature
Maximum ambient temperature
Operating temp for electronics
Storage temp for electronics
Sample line connection size
Specific volume
Sensor cross section flow area
Type 316 SS
2160 psig @ 100°F (15 MPa @ 38°C)
257°F (125°C)
185°F (85°C)
-40°F to +185°F (-40°C to +85°C)
-40°F to +185°F (-40°C to +85°C)
1" NPT or 1”and 2” flanged
0.070 U.S. gallon (235 ml)
Approx. 0.75 inch2 (4.84cm2)
Electrical
Power Required
Enclosure
18 - 28 VDC @ 150 mA. (Grounded
or ungrounded)
Hazardous area Class I, Div. 1, Gr. C&D
EEx d IIB T4, zone 1, IP65
Output
Analog current
Maximum load
Isolation voltage
Relay contacts
Adjustable delay
Adjustable hysteresis
4 - 20 mA. DC, isolated, self-powered
600 Ohms
500 Volts peak
SPST-NO 2 Amp @ 24V DC, Non-inductive
0-43 million seconds
0-49.90% water
Terminal/Computer Interface.
RS-232C
Speed
Word size
Parity
Stop bits
Full duplex
9600 Baud
8 Bits
None
One
RS-485
Half duplex (application specific)
- 35 -
©2004, Delta-C Technologies Inc.