Download CE EMC TEST REPORT

Transcript
Report No: T130222L03-B-RE
7.2.4. TEST SETUP
z
For the actual test configuration, please refer to the related item – Photographs of
the Test Configuration.
7.2.5. Data Sample:
Frequency
(MHz)
QuasiPeak
reading
(dBuV)
Average
reading
(dBuV)
Correctrion
factor
(dB)
QuasiPeak
result
(dBuV)
Average
result
(dBuV)
x.xx
43.95
33
10.00
53.95
43.00
Frequency (MHz)
Reading (dBuV)
Correction Factor (dB)
Result (dBuV)
Limit (dBuV)
Margin (dB)
QuasiPeak. Average QuasiPeak
limit
limit
margin
(dBuV)
(dBuV)
(dB)
74.00
64.00
-20.05
Average
margin
(dB)
Remark
-21.00
Pass
= Emission frequency in MHz
= Uncorrected Analyzer/Receiver reading + Insertion loss of LISN, if it > 0.5 dB
= ISN Factor + Cable loss
= Raw reading converted to dBuV and CF added
= Limit stated in standard
= Result (dBuV) – Limit (dBuV)
7.2.6. TEST RESULTS
No applicable, because the EUT doesn’t have LAN port or Modem port.
Page 19
Rev.00
This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.