Download View User Manual - Redline Security

Installation
Structure
1. Install the camera at the proper monitoring location. and screw
up the bracket.
Camera
Antenna
The rain cover
Antenna Socket
Infrared LEDs
Lens
PIR sensor
Pair Button
Power Indicator
Link Indicator
Power Input
Bracket
Upright installation
2. Install the receiver at a proper location. Positioned on a level plane.
Receiver
Bracket
Antenna
Power Indicator
USB Port
Power on/off
Menu
7"TFT-LCD
Loop Display Mode
Quarter Display
Record/stop Video
Delete / TV Switch
Playback Video
Navigate Button
OK Button
SD Card Slot
AV Output Port
Power Port
Pedestal Slot
3. Insert the SD card or connect an external storage device, such
as a mobile hard disk.
Pedestal Slot
Reset Button
Link Indicator
Network port
Power Port
Optional
Remarks:
Power on/off
Navigate Button
OK Button
Record/stop Video
Quarter Display Button
Delete file/LCD、TV Switch
Playback Video
Display Mode
Menu
It doesn’t support hot-swappable of SD card or external storage device.
The external mobile disk/SD card should be in format of Fat32.
Please format the SD card or external mobile disk if they have
been used on other device.
The receiver must be powered by external power supply when connecting
with a mobile hard disk, otherwise the disk will not work properly.
Please use class 4 or above SD card, Otherwise, cannot be identified.
03
04