Download MODBUS(R) Interface Module User`s Manual

11
TROUBLESHOOTING
9
This section explains how to turn off the ERR.LED of the QJ71MB91 when it is lit.
10
POINT
(
Section 11.1, Section 11.4)
If not, the following operation will not turn off the ERR. LED.
The ERR. LED turns on when an error occurs.
Once the ERR. LED has turned on, it does not turn off automatically even if
the status returns to normal.
Perform the following to turn off the ERR. LED.
Table11.17 List of methods for turning off the ERR. LED
Reference
Turning off by GX Configurator-MB
Section 11.5.1
Turning off by sequence program
Section 11.5.2
Turning off by request message from master
Section 11.5.3
(when the QJ71MB91 is a slave)
11
APPENDICES
Method
DEDICATED
INSTRUCTIONS
2.
Remove possible error cause before turning off the ERR. LED.
TROUBLESHOOTING
1.
PROGRAMMING
11.5 Turning Off the ERR. LED
11.5.1 Turning off the ERR. LED by GX Configurator-MB
INDEX
This section explains how to turn off the ERR. LED from GX Configurator-MB.
(1) Making the Monitor/test screen active
Make the Monitor/test screen active.(
Section 8.6)
Figure 11.8 Monitor/test screen
11.5 Turning Off the ERR. LED
11.5.1 Turning off the ERR. LED by GX Configurator-MB
11 - 40