Download Convision V600 A Series
Transcript
6. Click "Add" to select actions that are to be performed in the selected periods. 7. A page will be displayed on which you can assign the event actions from various groups. 8. You can assign any number of actions. All the actions assigned will be listed in the table in the line associated with the respective period. 9. Repeat steps 1 to 8 for other periods, if desired. 10. Save the data. 11. Click "Delete" to cancel the assignment of actions. ☛ Note: All the actions you want to trigger must first be configured. Clicking on the actions opens the associated configuration pages. Check the status on these pages to avoid assigning partitions that do not exist or messages that have not been written. 9.3.4 Activity Detection Camera 1 can act as an activity detector. Via this menu you can assign actions to the cameras to be performed when an activity message is received. Figure 43: Configuring the activity detection 1. Enter a name. 2. Click "Activity Cam 1" in the first table column to display the next configuration page. Figure 44: Activity Detection – properties - 62 - Convision V600 A Series