Download Convision V600 A Series

6. Save the data.
7. Start recording to the frame buffer by clicking the corresponding option in the
table in the lower part of the page. The black indicator to the right of the option will
change to red.
8. Repeat steps 1 to 7 for other frame buffers, if desired.
Stop recording to the frame buffer by clicking the corresponding option in the table in
the lower part of the page. The red indicator to the right of the option will change
back to black.
To send a frame buffer by e-mail or VdS 2465 notification, open the "Configuration /
Action / eMail or VdS2465” page, select the desired message and activate the
checkbox(es) next to the desired frame buffer(s). After they are sent, frame buffers
are automatically restarted. The images stored in the buffer are overwritten by a new
event.
A frame buffer that was activated but not sent will not be restarted. In this case, all
the pre and post event images will be displayed.
9.4.3
Output (Time)
If an event occurs (at an input or under time-control) that is assigned an output, this
output is activated for the set time. For information on activating the outputs
manually, refer to Chapter 8.5.1.
1. Enter a name.
2. Enter the operating time for each of the two outputs (Output 1 and Output 2) in the
"Operating time" input field.
3. Save the data.
9.4.4
Transferring Data via FTP (Upload)
At predefined points in time or in response to an event, the Convision V6xx A can
transfer an image (Upload) to a web server directory via FTP.
In this case, the Convision V6xx A is the FTP client. (For information on configuring
the Convision V6xx A as the FTP server, please refer to Chapter 9.1.10). You can
transfer an up-to-date image recorded by any camera as well as data of a connected
weather station.
☛ Note: The login information can be obtained from your administrator (LAN) or
from your provider.
1. Select one of the 8 FTP uploads in the upper button bar.
2. Enter a name.
3. Specify the name or the IP address of the server to which the images are to be
transferred.
4. Enter a login name and password with access rights to this server.
Handbuch
- 65 -