Download Alpha Controller User Manual - Stanley Engineered Fastening

Alpha Controller
Getting Started
This manual is intended to promote proper and safe use and give guidance to owners, employers,
supervisors, and others responsible for training and safe use by operators and maintainers. Please
contact your Stanley Sales Engineer for further information or assistance on Stanley training or
assembly tool operations.
1.1
EC Directives
The QPM tightening systems are designed and built, in whole or in part, using the following
standards and or directives.
2006/42/EC Machinery Directive
Standard
EN292-1,2
EN14121-1
EN50178
EN60204-1
EN60745-1
Title/Description
Safety of Machinery - Basic Concepts
Safety of Machinery - Principles of Risk Assessment
Electronic Equipment for Use in Power Installations
Safety of Machinery, Part 1 - Electrical Equipment of Machines
Hand-Held Motor-Operated Electric Tools - Safety
89/336/EEC Electromagnetic Compatibility Directive
Standard
EN55011
EN61000-3-2
EN61000-3-3
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
EN61000-4-2
1.2
Title/Description
Conducted and Radiated Emissions
Current Harmonics
Voltage Fluctuation and Flicker
Radiated Immunity
Fast Burst Transients
Surge
Conducted Immunity
Magnetic Immunity
Voltage dips/interruptions
Electrostatic Discharge Immunity
Level 4: Contact Discharge 8 KV, Air Discharge 15 KV
Warnings and Cautions
The safety notices and warnings for protection against loss of life (the users or service personnel)
or for the protection against damage to property are highlighted in this document by the terms and
pictograms defined here. The terms used in this document and marked on the equipment itself
have the following significance:
Danger
Indicates that death or severe
personal injury will result if
proper precautions are not taken.
Indicates a general hazard. This
icon appears as a part of a
Danger, Warning, or Caution
notice.
Warning
Indicates that death or severe
personal injury may result if
proper precautions are not taken.
Indicates that eye protection
should be worn. This icon
appears as a part of a Danger,
Warning, or Caution notice.
Caution
Indicates that property damage
may result if proper precautions
are not taken.
Read and understand all the
safety recommendations and all
operating instructions before
operating tools and controllers.
Getting Started
1