Download Alpha Controller User Manual - Stanley Engineered Fastening

Transcript
Alpha Controller
Appendix A – Embedded Toolbox Installation
Requirements for Alpha Controllers (Ethernet Connection):
• Javascript enabled browser Internet Explorer (IE) v6,v7
• Adobe Flash Player v9 or above
• http://www.adobe.com
• QA1001 Alpha Controller Version 3.0 or above
• Q1001 Alpha Controller Version 4.0 or above
Connect to the controller using the IP address in the browser. Alpha controllers can also connect
through the Controller Gateway using the serial port as described for the Q0001 Kappa controller.
Requirements for Alpha Controllers Using the Controller Gateway (Serial
Connection):
• Microsoft Windows XP (for serial connection to a controller)
• Q0001 Kappa Controller v2.0 or above
• Javascript enabled browser and Adobe Flash Player described above
The Controller Gateway is a Windows based software program that provides a web based interface
to an Alpha controller connected via a serial link.
Installing the Controller Gateway
Using the provided installation media, run the setup program and follow the on-screen
instructions. During installation, TCP/IP ports for the web interface and the live event interface
can be set. Leave the default values unless you understand their meaning and require a port change
for your specific environment.
Running the Controller Gateway
The installer sets the Controller Gateway to automatically launch each time the computer is
started. When Controller Gateway is running, a small icon appears on the system tray or Windows
Task bar (typically at the bottom right corner of the screen).
Right clicking the Controller Gateway icon displays its menu. From the menu, select the AutoConnect option. Note that Auto-Connect is the default option; this means that double-clicking the
Controller Gateway icon also starts the auto-connection process.
The auto-connection process launches the default web browser and examines the computers
available serial ports. The Controller Gateway looks port by port for a compatible Stanley
controller connection. When one is found, the browser redirects to the controller’s main menu.
From the menu, setup, maintenance and analysis functions can be performed.
If a compatible controller is not found, the auto-connect mechanism offers to try again. If you
choose to not try again, the browser is redirected to an “Offline Mode” menu. In offline mode,
setups and configuration file exports can be created. These files can be imported to a connected
controller in the future.
Appendix A – Embedded Toolbox Installation
93