Download PrintJet ADVANCED

Troubleshooting
Code
Event
Measure
Information
40159
The ink collecting
tray was not
inserted correctly.
Insert the ink
collecting tray
correctly and
make sure that it
is fully engaged.
Restart the printer
if necessary.
If the message is
displayed again, please
contact your Weidmüller
representative.
40904
The temperature
is too high.
Wait a while until
the printer has
acclimatized.
Restart the
printer.
If the message is
displayed again, please
contact your Weidmüller
representative.
40905
The temperature
is too low.
Wait a while until
the printer has
acclimatized.
Restart the
printer.
If the message is
displayed again, please
contact your Weidmüller
representative.
40011
The ink collector
unit is full.
Replace the ink
collector unit.
The order number
is 1338710000.
If the ink collector unit is
full, you can no longer
continue to print.
Dispose of the wastepad
through an authorized
dealer or at a suitable
hazardous materials
disposal center.
Check local regulations
before attempting to
dispose of the wastepad
yourself.
10044
The temperature
is too low.
Wait a while until
the printer has
acclimatized.
Restart the
printer.
If the message is
displayed again, please
contact your Weidmüller
representative.
10045
The temperature
is too high.
Wait a while until
the printer has
acclimatized.
Restart the
printer.
If the message is
displayed again, please
contact your Weidmüller
representative.
Internal error
Restart the
printer.
If the message is
displayed again, please
contact your Weidmüller
representative.
1449820000/1.1/03.13
Do not open the
wastepad. The complete
tray must be replaced.
143