Download ZCTR02A User Manual

Document No: WI-JS-400-006
Edition:A/0
State 4： Set relative zero, set the current angle value of 2 axis as zero. It can successfully set
after pressing the Mode button (about 1 second). This feature is to send relevant
command to inclinometer. It will return absolute angle output when power off.
State 5： Setting X-axis alarm angle, press setting button add 1,the maximum value is 30,
when more than 30,it will re-start counting from 0;
State 6 ： Setting Y-axis alarm angle, press setting button add 1,the maximum value is 30,
when more than 30,it will re-start counting from 0;
Ⅷ.Structure specification：
There are two four digit LED display in front of ZCTR02A. The upper 4 digit displays angle value
of X axis, the below 4 digit displays angle value of Y axis. There are two buttons for mode
switching and parameter setting; There are 12 connect pins on the back of ZCTR02A for connect
power supply, serial communication signal line and the control line of alarm.
Product picture
picture::
set
Mode
Order information：Part number
ZCTR02A
Specifications subject to change without notice!
Shanghai Zhichuan Electronic Tech Co.,Ltd
ADD：3/F,1128 Denghui Rd., Minhang district, Shanghai, 201109,China.
TEL：+86-021-64908096 Http://www.zc-sensor.com
Page 5 of 5