Download Engine Analyzer Pro User`s Manual

(C) Performance Trends Inc 2009
Engine Analyzer Pro
Appendices
Figure A36 New See-Engine Features
Print Data options
to produce report
as shown below
Viewing speed to speed up
or slow down animation
Valve
Separation,
used in
Valve Clash
calculations
Valve Clash results, for multi
valve and Hemi type heads.
Valve Clash is what the clash
clearance is at this particular
crank degree being shown. Min
Valve Clash is the smallest
clearance for all crank degrees
tested. If it is negative (-), it
means that particular valve has
entered into the other valve’s
‘curtain’ surface, a cylinder swept
out by the edge of the valve. See
drawing at bottom of this figure.
Data report of all engine data
used to produce this screen,
including valve clearance and
valve clash results. Clash
results only show if you have
specified a ‘Hemi’ or ‘Pent
Roof’ type head layout, or more
than 1 intake or exhaust valve.
Exhaust valve’s ‘curtain’ surface (cylinder swept out by edge of valve)
Intake Valve Clash (intake valve enters into exhaust valve’s ‘curtain’)
255