1
Download FATEK FvDesigner Manual
Transcript
Figure 269 Information of supported PLC driver versions Figure 270 Information on internal PLC single point and registers available for access Introduction to the internal PLC single point and registers available for access is as shown in the table below. Table 172 Introduction to internal single point and register information Name Description 【Device Type】 Represent the code of the single point or register in the PLC. 【Data Bits】 Represent the number of bits occupied by the data of this 【Min】 for access for this【Device Type】. Represent the minimum value of the address range available 【Device Type】. 【Address Format】 Represent the address format that must be used to access this【Device Type】. Represent the maximum value of the address range available 【Max】 for access for this【Device Type】. 【Description】 424 Describe the function and usage of the【Device Type】.
