Download user manual - Related Software

Transcript
Fig. 23. Column properties and available beam-column element types ........................... 41 Fig. 24. Definition of linear column ................................................................................. 42 Fig. 25. Column Elastic material properties ..................................................................... 42 Fig. 26. Column Section properties .................................................................................. 42 Fig. 27. Nonlinear Fiber Section window ......................................................................... 43 Fig. 28. Column nonlinear material properties: a) Steel02 material; b) ReinforcingSteel material;
c) Concrete02 material for the core concrete; d) Concrete02 material for the cover material
.................................................................................................................................... 45 Fig. 29. Column fiber section (based on PEER best modeling practices report, Berry and
Eberhard, 2007): a) Circle; b) Octagon; c) Hexagon ................................................. 46 Fig. 30. OpenSees quadrilateral patch employed for calculating the cover concrete fibers for: a)
Octagon; and b) Hexagon cross section ..................................................................... 46 Fig. 31. Stress-strain curve for a steel material (default values employed): a) Steel01 (with a
strain limit); b) Steel02 (with a strain limit); and c) ReinforcingSteel (with a strain limit)
.................................................................................................................................... 48 Fig. 32. Stress-strain curve of the core concrete material (default values employed): a) Elastic-No
Tension; b) Concrete01; and c) Concrete02............................................................... 50 Fig. 33. Stress-strain curve of the cover concrete material (default values employed): a)
Concrete01; and b) Concrete02 .................................................................................. 51 Fig. 34. Moment-curvature response for the column (with default steel and concrete parameters,
and the deck weight 2680 kip applied at the column top ........................................... 51 Fig. 35. Foundation types available in MSBridge ........................................................... 52 Fig. 36. Shaft foundation for abutments and bents ........................................................... 53 Fig. 37. Pile foundation model for abutments................................................................... 54 Fig. 38. Soil springs .......................................................................................................... 55 Fig. 39. Soil spring calculations based on p-y equations: a) Soft Clay (Matlock); b) Stiff Clay
without Free Water (Reese); c) Sand (Reese) ............................................................ 57 Fig. 40. Soil spring definition window after using the soil spring data calculated based on p-y
equations .................................................................................................................... 58 Fig. 41. Sample FE mesh of a bridge model with soil springs included........................... 58 Fig. 42. Local coordination system for the foundation matrix ......................................... 59 xii