Download Installation Guide/User manual

8
DIP switch settings for BMW/Mini
The following DIP switch settings are used to configure the Silverline DUO module to interface
with the various vehicle radios. Before installation, set the DIP switch to the position shown for
the corresponding radios.
Car configuration switches
BMW
Business CD Radio
OFF
BMW
Navigation Radio
OFF
BMW MID Radio
OFF
OFF
ON
Recommended for single line
display or non-navigation radio
system.
(Mini, 3-series, Z3, Z4, X3)
MINI with Navigation
For 16:9 (wide screen)
navigation radio system.
ON
ON
For 4:9 (small screen)
navigation* and MINI
Cooper with Navigation.
ON
For non-navigation radio
system on BMW 5, 7, X5
series MID units.
*4:9 (small screen) navigation radios require special firmware available from DICE Electronics support.