Download MS-2D Engine User Manual

Demo Kit Quick Start
Indicators
The development board includes a speaker (SPK1) for audible indication as well as a bi-color
LED (D1) for visual indication.
Configuration Jumpers
A group of jumpers allow the development board to reconfigure and access different features
of the MS-2D. J7 and J8 configure auxiliary serial port features that appear on J2 and J3.
J5 configures serial port polarity, and J6 in conjunction with SW2 controls which boot
mode the MS-2D enters upon powering up. Finally, the MS-2D host port configuration can
be changed via the jumper block J9-J18.
Auxiliary Headers
J2 and J3 provide auxiliary and debug serial communications to the MS-2D, and J19
provides access to all of the expanded illumination I/O.
MS-2D Connections
The MS-2D connects to the development board via J23 and J24. (J24 allows you to connect
the development board to the engine for external illumination. J24 is also connected to
J19, the Illumination Expansion Header.) Contact Microscan for the flex cable to connect
J24 on the development to the MS-2D’s decode board.
See Host Interface Pinouts (RS-232) and Host Interface Pinouts (USB) for the RS-232
and USB pin assignments of J23.
MS-2D Engine User Manual
1-5