1
Download User Guide - Cole
Transcript
When the DataStick is absent the display will read “DataStick Absent” as shown in Figure 3. If the sensor is wired correctly and the “DataStick Absent” message appears, be sure that the DataStick Sensor has the correct station number as indicated by the number in the lower right corner of the measure screen. If that is correct, also check that baud rate and parity are set up correctly in the DataStick. DataStick Absent DS1: __ 6 ▲ MENU ESC ENTER ◄ ► ▼ Figure 3: The initial measure screen when the DataStick is absent. When the sensor head is absent, the condition will be indicated by “Sensor Head Absent” on the measure screen as shown in Figure 4. Sensor Head Absent DS1: __ 6 ▲ MENU ESC ENTER ◄ ► ▼ Figure 4: The initial measure screen when the Sensor Head is absent. Thermo Scientific AquaSensors™ AV38 Local Display and Controller User Guide 20
