Download Chapter 1

Chapter 4 - Software Index
Parameter Group 15 - Operation Status and Function Reset
15-0: Drive Horsepower Code
15-0
2P5
201
202
203
205
208
210
215
220
225
230
240
RVCF
Inverter Model
RVCFA1200040
RVCFA3200040
RVCFA1200075
RVCFA3200075
RVCFB1200150
RVCFA3200150
RVCFB1200220
RVCFB3200220
RVCFB3200370
RVCFC3200550
RVCFC3200750
RVCFD3201100
RVCFD3201500
RVCFD3201850
RVCFE3202200
RVCFE3203000
15-0
401
Inverter Model
RVCFA3400075
402
RVCFA3400150
403
RVCFB3400220
405
408
410
415
420
425
430
440
450
460
475
RVCFB3400370
RVCF
RVCFC3400550
RVCFC3400750
RVCFC3401100
RVCFD3401500
RVCFD3401850
RVCFD3402200
RVCFE3403000
RVCFE3403700
RVCFF3404500
RVCFF3405500
15-1: Software Version
15-2: Fault Jog（
（Latest 3 times）
）
1. When the inverter doesn’t work normally, the former fault log stored in2.xxxx will be transferred
to 3.xxxx, then, the one in 1.xxxx to 2.xxxx. The present fault will be stored in the blank 1.xxxx.
Thusly, the fault stored in 3.xxxx is the earliest one of the three, while the one 1.xxxx is the latest.
2. In 15-2, the fault 1.xxxx will be displayed at first, press▲, you can read 2.xxx→3.xxx→1.xxx,
whereas▼, the order is 3.xxx→2.xxx→1.xxx→3.xxx.
3. In 15-2, the three fault log will be cleared as the reset key is pressed. The log content will changed
to 1.---，2.---，3.---.
4. E.g. if the fault log content is ‘1.OCC’ which indicates the latest fault is OC-C, and so on.
15-3: Accumulated Operation Time 1 (Hours): 0 – 9999
15-4: Accumulated Operation Time 2 (Hours X 10000): 0 - 27
15-5: Accumulated Operation Time Mode: 0000: Power on time
0001: Operation time
1. When the operation time 1 is set to 9999, the next hour will be carried to operation time 2.
Meanwhile, the recorded value will be cleared to 0000, and the record value of operation duration
2 will be 01.
4-54