1
Download NASGRO v6.2 Release Notes
Transcript
• TC18 – Through Crack(s) at Offset Embedded Slot or Elliptical Hole in Plate (Univariant WF) o This SIF solution is for a through-thickness crack (or two symmetrical throughthickness cracks) at the notch tip(s) of an (offset) embedded slot or elliptical hole in a plate. A wide range of geometry parameters is allowed. Stresses can be applied as remote tension/in-plane bending or (un-cracked) crack plane stresses. TC18 Embedded Slot TC18 Elliptical Hole 2
