Download LungBoost User Guide

ERASE ALL HISTORY DATA
ENDURANCE
You can choose to delete the information for all previous
measurements from the device’s memory.
EXIT
Press and hold the MEM button and the LEFT ARROW button
(EXIT button) at the same time to display the “Erase Memory?”
screen, as shown below.
STRENGTH
OK
LEVEL
MEM
Press OK to confirm and erase all previous exercises
Press EXIT to cancel and keep all of the previous exercises in
memory.
WHAT CAN I DO NEXT?
After you have finished displaying data in Memory Mode, several options are available to you:
1. Perform an Endurance Mode exercise
To do an Endurance Mode exercise, simply press the ENDURANCE
button on the Handheld unit console and follow the instructions for
Endurance Mode exercise in Section 7.7. Endurance Mode on page 13.
2. Perform a Strength Mode exercise
ENDURANCE
EXIT
To do a Strength Mode exercise, press the STRENGTH button and
follow the instructions for Strength Mode exercise in Section 4.8.
Endurance Mode on page 13.
3. Turn off the device
Press and hold the OK button for a few seconds to turn off the device.
18
STRENGTH
OK
MEM
LEVEL