1
Download TWC USER MANUAL
Transcript
45 The two functions above (Show data and Show overview) will open two different ways of viewing the Monitoring data. Show data: Displays the “raw” data test test test test test test test Direct Direct Direct Direct Direct Direct Direct 20000327 20000327 20000327 20000327 20000327 20000327 20000327 013200 013200 013200 013200 013200 013200 013200 L2 L3 L4 L5 L6 L7 L8 D D D D D D D Stopped Stopped Stopped Stopped Started Started Started As you can see this is very similar to the comma delimited file you get from the Extract Mon. Data function. The software remembers the last time you extracted data and it only works with the latest data set which is added to the old data. Of course you can use the raw data like any other spreadsheet, i.e. you can work with the data by sorting, filtering, summing, and so on. Show overview: Displays Data by steps As you can see the overview gives details of start/stop time for each step and if you have a Flowmeter/Sensor decoder installed, it will also give you the water consumption per step and per day…. The overview is calculated from the raw data (Show Data) View Monitoring Data The View function performs the same function as the Extract and View function but it does not extract new data…. It will open the Excel spreadsheet for viewing.
