Download Genesys User Manual

Appendix A – Processing Cassettes Switch Settings
On each of the EQ and Dynamics cassettes, there is a block of eight dipswitches, the first four of which need to be set so that each card is
addressed correctly.
The switch settings below are the same for both EQ and DYN cassettes.
Board ID
NB:
The presence of these
switches mean that cassettes
cannot just be removed from
one section of the console
and then reinserted into
another at will.
Cassettes may still be moved,
but they will not function
correctly unless the first three
switches are set to reflect
their new position in the
console.
Board ID
Position
SW 1
SW 2
SW 3
1-8
Off
Off
Off
9 - 16
ON
Off
Off
17 - 24
Off
ON
Off
25 - 32
ON
ON
Off
33 - 40
Off
Off
ON
41 - 48
ON
Off
ON
49 - 56
Off
ON
ON
57 - 64
ON
ON
ON
- 226 -
SW 4
SW 5, 6, 7 & 8
ON for 32-bit
systems
or
OFF for 8-bit
systems.
If in doubt,
please consult
AMS Neve.
All
Off