Download Compiled SCPI Functions

Online Documentation
SCPI COMMAND DESCRIPTIONS
ABORt
Place multimeter in idle state.
CALibration:LFRequency 50 | 60 | MIN | MAX
Change line reference frequency.
ONSRQ RESTRICTIONS
The following commands can not be used in SRQ handlers which
execute as an interrupt routine since they internally call
iwaithandler:
if cscpi_overlap off
SENS:FUNC
SENS:[VOLT | RES]:APER
SENS:[VOLT | RES]:NPLC
SENS:[VOLT | RES]:RES
CONF:....
*RCL
*RST
INIT, READ?, MEAS? (for aperture = 2.5 ms) or with 1460
scanners
The following commands may cause an SRQ handler to execute from
an interrupt routine if SRQ is enabled on the condition:
Any overlapped command followed by the *OPC command with
cscpi_overlap on.
An INIT, READ? or MEAS? command with aperture =2.5 ms which
sets the error bit from a timer too fast error.
Appendix A
135