Download IC64-16 - Pyramid Technical Consultants

PSI System Controls and Diagnostics
Mounting face 1
Mounting face 2
Figure 5. IC64-16 mounting surfaces.
The standard arrangement involves fixings to the two mounting surfaces, leaving a clearance as
necessary for the gas fitting. There are M6 tapped holes, 5mm dowel holes and fiducials on the
IC64-16 housing, as shown in figures 1 and 2. A stabilizing attachment can be made to the
features at the opposite corner (figure 6).
Locating hole
M6 hole
Figure 6. Additional mounting features.
IC64-16 User Manual
IC64-16_UM_141204
Page 19 of 53