Download Netviewer AG

Functions for both session partners
Video transmission
The video function, whereby Netviewer transmits webcam video to the
session partner, makes online communication and cooperation even more
personal. In the Video and My video trays you can view your session
partner’s video and transmit your own video to him or her.
A properly installed and connected webcam is required for video transmission.
Of course, your video image will be transmitted only with your approval. Outside
monitoring through the webcam is not possible.
Video transmission can take place in one direction or simultaneously in both
directions:
•
•
Both session partners have a webcam. When holding a
conversation, they see each other in their Video trays.
Only the consultant has a Webcam. This gives a sales
presentation or similar meeting a more personal atmosphere.
You can choose between no image, a static image file, a video file, or a
Webcam as the video source. The most recently used source will always be
selected.
Transmitting your own video
1.
Open the My video tray and check in the Video source context
menu to make sure the desired video source is selected.
Transmission of video to the session partner is always initially
deactivated.
2.
Click on “on”.
3.
Check the transmitted video and properly align the Webcam if
necessary.
Interrupt transmission and transmit a static image
•
In the lower left of the My video tray click on the Activate still
button.
To discard the static image and reactivate transmission:
•
Click on the button End still.
Transfer saved image or video
Instead of transferring the video from a Webcam, you can also transfer a
static image (file formats .bmp or .jpg) or a video (file formats .avi or .mpeg)
in the My video tray.
You can also use the video function in order to show your session partner video files.
Select the video file (.avi or .mpeg) through the My video tray. To view a larger
version of the video, you can drag the Video tray from the Control panel and enlarge
it.
NETVIEWER SUPPORT
47