Download PDF - Oy LAI
Transcript
LM 486 User manual 2. Lower the attachment rack/tool into place so that the rear attachment bolts enter the holes on the attachment points. 3. Lower the attachment rack/tool into place, so that the rear attachment bolts enter the holes on the attachment points. 4. Install the front attachment bolts. 5. Tighten all the attachment bolts. Varoitus! Varning! Warning! For lifting the attachment rack/tool, use sufficiently strong lifting equipment while taking the weight of the equipment into consideration. When installing the lifting equipment, note the location of the tool’s centre of gravity, so that the attachment rack/tool is lifted and lowered as upright as possible. Proceed with caution! 3.7 Coolant expansion tank Varoitus! Varning! Warning! Take care when opening the expansion tank cap on a hot engine! Hot liquid discharged with great pressure causes severe burns. Figure 17. The level of the coolant must be between the “MIN” and “MAX” lines when cold. Add coolant as necessary. Every autumn, ensure that the coolant is frostproof. 3.8 Engine compartment Figure 18. Open the latch (A) and lift up the bonnet (B). The entire engine compartment is available for maintenance. If accessories have been installed on the bonnet, they may need to be removed for service work. Coolant levels can be checked through the service hatch, see Figure 17 Ver. 27102014 03 Machine structure 17