Download PDF - Oy LAI

LM 486
User manual
1.2 User manual
This user manual comprises seven (7) different sections:
01 Introduction
– Table of contents
02 Safety
03 Machine structure
04 Cabin and controls
05 Driving and use
06 Maintenance
07 Technical specifications
The LM Trac machine embodies the latest technology and its operation
and maintenance also set requirements for the machine operator and
maintenance engineer. By reading and understanding the information
contained in this manual, you will ensure the safe and technically
correct operation and maintenance of this machine.
The aim has been to create a manual that is as clear as possible and
every step has been taken to ensure the sufficiency and correctness of
the information presented in the manual. However, due to the many
different kinds of operating conditions and methods, it may possible
that some vital piece of information has been accidentally left out or is
incorrect. The machine's operator must take this into account and
proceed accordingly.
This manual does not contain the operating and maintenance
instructions for tools that can be connected to the machine. The
operator must carefully read the safety, operation and maintenance
instructions of the tools being used.
1.3 Safety and environmental protection
Great care has gone into ensuring that the machine we have
manufactured is environmentally sound and safe. The operator is,
however, solely responsible for using the machine with respect for the
environment and its safety.
Read carefully section 02 of this manual, entitled ‘Safety’.
1.4 Structural changes
Any changes to be made to the structure and/or operating system of the
machine always require written authorisation from Oy LAIMU Ab
otherwise the warranty becomes void.
1.5 Liability for errors and warranty
The liability for errors/warranty of Oy LAIMU Ab does not cover damage
that is demonstrably the result of actions that are contrary to the
instructions provided in this manual.
Ver. 27102014
01 Introduction
5