Download PDF - Oy LAI

Transcript
LM 486
User manual
2. Lower the attachment rack/tool into place so that the rear attachment bolts
enter the holes on the attachment points.
3. Lower the attachment rack/tool into place, so that the rear attachment bolts
enter the holes on the attachment points.
4. Install the front attachment bolts.
5. Tighten all the attachment bolts.
Varoitus!
Varning!
Warning!
For lifting the attachment rack/tool, use sufficiently strong lifting
equipment while taking the weight of the equipment into consideration.
When installing the lifting equipment, note the location of the tool’s
centre of gravity, so that the attachment rack/tool is lifted and lowered as
upright as possible. Proceed with caution!
3.7 Coolant expansion tank
Varoitus!
Varning!
Warning!
Take care when opening the expansion tank cap on a hot engine!
Hot liquid discharged with great pressure causes severe burns.
Figure 17.
The level of the coolant must be between the “MIN” and “MAX” lines when
cold. Add coolant as necessary. Every autumn, ensure that the coolant is frostproof.
3.8 Engine compartment
Figure 18.
Open the latch (A) and lift up the bonnet (B). The entire engine compartment is
available for maintenance.
If accessories have been installed on the bonnet, they may need to be removed
for service work. Coolant levels can be checked through the service hatch, see
Figure 17
Ver. 27102014
03 Machine structure
17