Download MULTI-FUEL PLATFORM AND TEST PROTOCOLS FOR OVER

35
connection to the fuel T fitting. Attach the longer of the two fuel meter lines to the T
fitting inlet and plug the original line as shown in Figure 3.2.3. Both plugs are size
AN –8. Route the two fuel lines to the fuel meter, making sure they are not near the
exhaust, or moving engine components. Lastly, the fuel cart requires a 12V source
for power. A remote battery near the fuel meter needs to be connected to the main
vehicle battery with a minimum of 8-gage wire. Connect the fuel meter to the
battery. Plug in the lines to the engine and remote fuel tank in to the fuel meter,
switch the meter on, set the fuel pressure by turning the blue knob. Because the
fuel pressure regulator is still installed in the system, the meter pressure will never
pressurize above the regulated pressure. Check for leaks at all the fittings, then reinstall the engine cover.
Figure 3.2.2 Remote return line connection