Download Configuration Guide

Configuring Static IP Addresses
For specific Oki models, (currently the B400 and MB400 series), IP Addresses can
be configured remotely using the Enterprise edition of PSV. This allows you to
change Dynamic IP addresses to Static IP Addresses (or vice versa) without
physically being onsite and changing it from the device operator panel. Additional
Oki devices will be supported in future releases of PSV.
Changing the IP Address assignment method (dynamic to static or vice versa) can
be accomplished in three ways:
1. By all groups that contain the requisite attributes
2. By a group of devices in a single subnet
3. By importing a CSV file containing a list of devices
By Groups that contain required attributes
1. From the main menu click Tools and select Configure Static IP Address from
the drop down menu.
The screen above provides background information on how to go about changing
the way IP Addresses are assigned.
There are 2 additional options in the drop down menu that help find matching
devices inside of selected subnets and to detect the type of IP address
configuration that the device is using.
69