Download DownLoad - Friend LED Lighting Co., Ltd.

www.friendled.com
[email protected]
Friend LED Lighting Co., Ltd.
Product Specification
Input
Out put
LED Controller
DC+
V+
1
2
3
DC
Receiver
Working voltage:
R/CH1
12V/24VDC
6AX3CH
G/CH2
Remote Control
B/CH3
Power
Model : FL-CR301A
Art. No.：C-00004-00
Name: Touch RGB controller
Summary
This product is one of our newest intelligent RGB controller R&D by our company, adopting the newest
capacitance touch and wireless technology. With elegant color wheel and full touch panel under
Humanized design for easy installation and operation. The steady wireless control mode technology
makes the remote and free direction control come true by finger touch the corresponding button softly.
Meanwhile, the RF remote controller can control the color, mode and change speed with light-dimmer,
turning on, turning off and pause in long distance, high sensitivity, strong power-drive ability, steady
and reliable performance, This LED controller can be matched with all kinds of low-voltage RGB lights,
such as RGB rigid light strip, flexible light strip, RGB panel light, RGB modules and so on.
Features
1.Capacitance and wireless touch technology, no mechanical wear, overcoming the lifespan problems
caused by Physical buttons.
2.Visible color wheel, touched by finger, then What you see is What you get.
3.Auto adaptation of 12-24V DC working voltage and with input polarity protection function.
4. The newest PWM control technology, delicate light performance, no flicker.
5.High power dimmer control MOS tube with stable and reliable performance, strong.power-drive ability
with max. 18A of 3 channels.
6.Wireless RF control, free direction and long distance, more than 20 m.
7. Multi-type memory functions for color, modes, speed, and brightness.
8 .Smart appearance, standard input and output port, easy installation and high cost performance.
Applications
1.Construction decoration: commercial buildings, airports or subways.
2.Indoor decoration: hotels, shopping malls, squares, restaurants, bars, houses.
3.Outdoor decoration: advertising boards, parks, bridges, roads and overpasses, scenic spots.
4.Others: d ecorating for motor vehicles, the places needing RGB lights.
REV: 2
Page 1 of 6
www.friendled.com
[email protected]
Friend LED Lighting Co., Ltd.
Technical parameters
Controller
Supply voltage
12V~24VDC
Loadable current
6Ax3CH
Output channels
3CH
Output power
216W/432W(12V/24V)
Control method
RF
Connection mode
common anode
Changing number
18(7 static color modes，11dynamic changing modes)，1 wheel(64 color)
Dimmering mothod
PWM
Grey steps
256 steps per channel
Protection
The power input polarity protection
Remote
Working voltage
4.5VDC
Remote control way
RF
Launch frequency
433Mhz
Controlable distance
more than 20 meters
Battery types
3 pcs AAA type batteries
Standby power
0.08mW
Power consumption
6mW
Transmission power
40mW
Key Number
6 touch keys，1 touch wheel
Whole machine
Working temperature
-20℃~60℃
Identification
CE 、RoHS
Weight
380g
Packing size
L206.5×W136×H43mm
Panel and interface specifications
Input
DC+
V+
1
2
3
DC
Receiver
REV: 2
Ou t pu t
LED Controller
Working voltage:
R/CH1
12V/24VDC
6AX3CH
G/CH2
Remote Control
B/CH3
Power
Page 2 of 6
Friend
www.friendled.com
[email protected]
LED Lighting Co., Ltd.
Panel and interface specifications(continuous)
Function
Symbol
Turn off/on the LED light in any state.
Touch for selecting 18 change modes before and after.
Touch the color on the wheel to get what you want.
Static modes for Brightness increasing or decreasing.
Dynamic modes for speed accelerating or decelerating.
Voltage of power input port :12/24VDC.
Power output port for connecting LED lights.
Indicative light to show the power and signal receiver state.
Remote controller battery installation
This remoter is used 3 pcs AAA batteries, each voltage is 1.5V. Open the cover of the battery; load 3 pcs
AAA batteries correctly as per the positive and negative instructions in the battery pack.
If the indicator lights on the remote controller flash regularly without touch, please note the battery should
be changed.
The remote of low power consumption and awakening
When the user does not touch the remote controller for 20 seconds, the remote controller will automatically
enter the lower power sleep mode to save standby power consumption and extend battery life.
When the user needs to re-use reoperatethe controller, only touch any key on the touch panel (not the color
wheel) to wake up the remote controller for normal use.
Mode table
NO.
Mode
Remark
NO.
Mode
1
Static red
10
3-color gradient
2
Stati green
11
3-color smooth
3
Static blue
12
7-color gradient
4
Static yellow
13
7-color smooth
5
Static purple
14
3-color flicker
6
Static cyan
15
7-color flicker
7
Static white
16
3-color flash
8
3-color jump
17
7-color flash
9
7-color jump
18
Automatically Play
REV: 2
Brightness
adjustable
Brightness/
speed
adjustabl
e
Remark
Brightness/
speed
adjustable
Page 3 of 6
Friend
www.friendled.com
[email protected]
LED Lighting Co., Ltd.
The wiring and the typical product apply diagram
The diagram for showing how to connect( take RGB strip for example):
Input
Ou t p u t
LED Controller
DC+
V+
1
2
3
Working voltage:
R/CH1
12V/24VDC
G/CH2
6AX3CH
Remote Control
B/CH3
DC
Power
Receiver
+
+
R
G
B
B
R
R
G
G
B
B
Power amplifier figure
1. When the controller power is not enough, please adopt our constant voltage LED power amplifier.The specifi-
cations can be obtained by contacting our sales team.
2. The diagram for showing how to connect controllers, amplifiers and LED lights( take RGB strip for example) :
Power
AC
L N
DC
-+
Input
1
2
3
AC220V 110V
Ou t p u t
LED Controller
DC+
V+
V+
Working voltage: R/CH1
12V/24VDC
G/CH2
6AX3CH
R
G
B
Remote Control
B/CH3
DC
Receiver
Power
Controller
+
+
R
R
G
B
G
B
+
+
G
B
GB
+
G
B
B
+
+
R
R
G
B
GB
R
G
B
B
DC
-+
Ouput
LED Amplifier
DC+
V+
DC
V+
1
2
R/
CH1
12 V/2 4 V D C
6Ax3 C H
R/
CH1
G/
CH2
G/
CH2
+
B/
CH3
B/
CH3
Power amplifier
Power
+
R
R
G
B
G
B
+
R
G
B
+
+
R
B
+
G
B
R
B
+
R
R
G
B
G
B
G
B
+
R
G
B
+
R
B
G
B
DC
-+
Power
AC
L N
Input
DC+
Ouput
LED Amplifier
DC
V+
V+
R/
CH1
R/
CH1
1
2
12 V/2 4 V D C
6Ax3 C H
G/
CH2
G/
CH2
+
B/
CH3
B/
CH3
Power
REV: 2
R
Power
AC
L N
Input
AC220V 110V
R
G
B
R
R
+
AC220V 110V
+
B
R
G
B
Power amplifier
+
R
G
B
+
+
R
G
B
R
B
+
R
G
B
+
+
R
R
G
B
G
B
G
B
+
R
B
G
B
+
R
B
GB
Page 4 of 6
Friend
www.friendled.com
[email protected]
LED Lighting Co., Ltd.
Product dimensions
55.5mm
83mm
Input
V+
1
2
3
113.5mm
Ou t p u t
LED Controller
DC+
DC
Receiver
Working voltage:
R/CH1
12V/24VDC
6AX3CH
G/CH2
Remote Control
B/CH3
79mm
Power
￠3.6mm
33mm
2 2.5mm
Packing detail
Ou t p u t
LED Controller
DC+
V+
2
3
DC
Working voltage:
R/CH1
12V/24VDC
6AX3CH
G/CH2
Remote Control B/CH3
Receiver
Power
220mm
1
136mm
Input
U ser Manual
LED Controller Output
Input
DC+
1
V+
Wor
king
voltage :
12V/24VDC
2
3
R/CH1
6AX3CH
DC
Remote Control
G/CH2
B/CH3
Receiver
Power
LED RGB c ontroller
-with touc ha ble b utt o n
R ev: 1. 0
Controller size
Remote size
Packaging size
Weight/pcs
L83×W79×H33mm
L113.5×W55.5×H22.5mm
L206.5×W136×H43mm
380g
Carton size
Weight/box(30pcs)
L670×W286×H220mm
12.2kg
Product list
Input
User Manual
Ou t p u t
LED Controller
DC+
V+
1
2
Working voltage:
12V/24VDC
6AX3CH
Inp
ut
R/CH1
Ou t p u
t
LED Controller
DC
+
1
V
Working
voltage :
G/CH2
12V/24V
DC
+
R/C
H1
2
3
DC
Remote Control
B/CH3
6AX3CH
G/CH2
Remote
3 ControlB/CH3
DC
Receiver
Power
LED RGB controller
Receiver
Remote
Power
Controller
-with touchable button
Rev:1.0
User manual
Install caution
1. Please install the products by professional electrician.
2. This product can not waterproof, please put into water-proof tank if the clients want to use it outdoor.
3. Always be sure to mount this unit in an area that will allow proper ventilation to ensure a fitting temperature.
4. Please don't install this controller in lightening, intense magnetic and high voltage fields.
5.Check if the voltage and power adapter suit the controller and LED lights.
6.Please make sure the wires can sufficiently load the LED lights for avoiding accident.
7.Please make sure all the wires are connected correctly before switching on the power.
8.Please do not repair or maintain privately, any query, please contact suppliers.
REV: 2
Page 5 of 6
Friend
www.friendled.com
[email protected]
LED Lighting Co., Ltd.
After-sales service
1.The customers enjoy lifelong technical support for our products.
● Free Warranty: The customers enjoy free maintainance or replacement for quality problems within
one year upon date of purchasing.
● Paid warranty: If the free warranty time is overdue, We will charge certain cost of raw materials for
repair or maintainance.
2. Following cases are excluded free warranty terms:
● Any defects caused by wrong operations.
● Ay damages caused by unauthorized removal,maintenance,modifying circuit, incorrect connec tions
and replacing chips.
● Any damages due to transportation, breaking, flooding water after the purchase.
● Any damages caused by earthquake, fire, flood, lightning strike etc force majeure of natural disasters.
● Any damages caused by negligence, inappropriate storing at high temperature and humidity or environment near harmful chemicals.
3. Our company would take up the biggest responsibility to replace the same type and quantity accordingly.
4. The cilents please inform suppliers the faulty phenomena,using environment etc. for speeding up the
maintainace process.
5. The manual is only suitable for this model, any update is subject to change without prior notice.
Related products
Model：FL-AP102A
Name ：RGB Power amplifier
Model：FL-CT301A
Name：CT Touch controller
Version modify records
Version
Content
Date
REV: 1
2012.3.30
Create
REV: 2
2012.4.10
Increase the low power consumption, increase that awakening constant pressure
power amplifier developing part of the content and modify part of the page.
REV: 2
Page 6 of 6