Download Binary Serial Communications User Manual Rev. 2.2., 51-52-25-54

LP Bias 1 (P: Manual Reset)
Type: 0x62
Address: 0x01-xx
Format: FLOAT
where xx = 0x10 (M), LP: Count (P)
Size: 4
Mode: RW
Size: 1
Mode: RW
Size: 1
Mode: R
Format: BINARY
Size: 1
Mode: RW
Format: BINARY
Size: 1
Mode: R (M)
RW (P)
DATA FORMAT: Change from 0 to 1 causes bumpless transfer.
LP Tuning Parameter Selection
Type: 0x63
Address: 0x01-xx
Format: BINARY
where xx = 0x10 (M), LP: Count (P)
DATA FORMAT:
0 = primary
1 = secondary
LP Tuning Parameter Status
Type: 0x64
Address: 0x01-xx
Format: BINARY
where xx = 0x10 (M), LP: Count (P)
DATA FORMAT:
0 = primary
1 = secondary
LP Force OFF Select
Type: 0x65
Address: 0x01-0x10
DATA FORMAT: 1 = force off
LP Output ON/OFF Status
Type: 0x66
Address: 0x01-xx
where xx = 0x10 (M), LP: Count (P)
DATA FORMAT:
0 = off
1 = on
LP Self Tune Process Variable
Type: 0x67
Address: 0x01-0x10
Format: FLOAT
Size: 4
Mode: R
LP Bias 2
Type: 0x68
Format: FLOAT
Size: 4
Mode: RW
Address: 0x01-xx
Format: FLOAT
where xx = 0x10 (M), LP: Count (P)
Size: 4
Mode: RW
Address: 0x01-0x10
Format: FLOAT
Size: 4
Mode: RW
LP Working Set Point (%)
Type: 0x6B
Address: 0x01-0x10
Format: FLOAT
Size: 4
Mode: RW
Address: 0x01-xx
Format: FLOAT
where xx = 0x10 (M), LP: Count (P)
Size: 4
Mode: RW
LP Output 1
Type: 0x69
LP Output 2
Type: 0x6A
LP Ratio
Type: 0x6C
84
Address: 0x01-0x10
Honeywell Binary Serial Communications – User Manual
5/99