Download Technical Information Manual

Document type:
User's Manual (MUT)
Title:
Mod. V785, 16/32 Channel Peak Sensing Converter
Revision date:
27/11/2001
Revision:
3
4.17. Single Shot Reset Register
(Base Address + 0x1016, write only)
A write access to this dummy register performs a module reset. This register must be
used very carefully and for debugging purposes only. In order to reset the board, it is
recommended to use the Bit Set 1 Register (see § 4.9).
4.18. MCST/CBLT Control Register
(Base Address + 0x101A, write only)
This register allows performing some general MCST/CBLT module's settings.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LAST BOARD
FIRST BOARD
Fig. 4.20: MCST Address Register
LAST_BOARD
Last Board flag bit (valid in CBLT and MCST modes only)
FIRST_BOARD
First Board flag bit (valid in CBLT and MCST modes only)
The status of the boards according to the bit value is the following:
FIRST BOARD
bit
0
LAST BOARD
bit
0
First board in CBLT or MCST chain
1
0
Last board in CBLT or MCST chain
0
1
Active intermediate board in CBLT or MCST chain
1
1
BOARD STATUS
Board disabled in CBLT or MCST chain
(Bits 2 to 15 are meaningless).
NPO:
00102/97:V785x.MUTx/03
Filename:
V785_REV3
Number of pages:
74
Page:
51