Download 1EF89_Interference_Hunting_FSH

Transcript
Interference Hunting Steps
Locating the Interference Source
Fig. 22 GPS Position List menu. Three positions selected to triangulate.
Next, go to the GPS Position menu and click "Triangulate".
The FSH calculates the intersection point of the selected measurement bearing lines.
The result is displayed on the map as a dot surrounded by a circle (Fig. 23); the circle
radius is indicated on the screen. The circle indicates the area where the signal source
can be expected.
In Fig. 23, the dot and circle are blue and the measurement bearing lines are black.
However, you can assign a different color to the triangulation results and to the
measurement lines.
01
Rohde & Schwarz
21