Download BM-300C

Important Safety Precautions
● This instruction manual and the Product itself adopt symbols for precautions for safety.
The results caused by incorrect use and non conformity to the symbols are classified as
follows:
Please fully understand each precaution for safety and observe them.
Danger
Indicates potentially very hazardous situation which, if not avoided,
is likely to result in death or serious injury.
Warning
Indicates potentially hazardous situation which, if not avoided,
is likely to result in death or serious injury.
Caution
Indicates potentially very hazardous situation which, if not avoided,
is likely to result in minor or moderate injury or property damage.
● Meaning of each symbol
Indicates Pay Attention (Danger, Warning and Caution)
Indicates Do Not
Indicates Must Do
This Product is a Class 1 Laser Product. (IEC 60825-1:2007)
A Class 1 laser is safe under all conditions of normal use.
(Wavelength: 405nm, Maximum Power: 60mW)
Be sure to operate the product according to the User’s Manual and Instruction Manual.
Never operate the Product in the manner not described in the manuals.
Failure to follow this may result in injury or damage to the Product.
CLASS 1 LASER PRODUCT
IEC 60825-1:2007
Danger
To avoid electric shock hazard, fire, etc.
● Do not pour, put or insert metals such as a pin and wire, foreign materials and
liquid into or on the vent holes, holes and terminals of the Product.
● Do not disassemble, repair or alter the Product by not qualified personnel.
Failure to follow these may result in electric shock, injury or damage to the
Product.
-4-