Download M20 User manual

+CMUT: (0,1)
OK
2.1.4.10 Accumulated call meter +CACM
Table: +CACM parameter command syntax
Command
Possible response(s)
+CACM =[<passed>]
+CME ERROR: <err>
+CACM?
+CACM: <acm>
+CME ERROR: <err>
Description
Set command resets the Advice of Charge related accumulated call meter
value in SIM card or in the active application in the UICC file EFACM. ACM
contains the total number of home units for both the current and preceding
calls. SIM PIN2 is usually required to reset the value.
Defined values
<passwd> : string type; SIM PIN2
<acm>: string type
Informative example
-Initial the HyperTerminal
-Initial the MS
-AT Command
AT+CACM?
+CACM: "000000"
OK
2.1.4.11 Accumulated call meter maximum +CAMM
Table: +CAMM parameter command syntax
Command
+CAMM =[<passed>]
Possible response(s)
+CME ERROR: <err>
81
©2003 BenQ Corporation.
Confidential Property
M32 AT COMMAND LIST
Version: 0.3.0-2003/05/16