Download AVG Internet Security Network

184
AVG Internet Security Network
13.2. Client Info Tab
This tab is designed to set up the parameters of the update distribution from AVG
TCP Server to clients, or between AVG TCP Servers. Two modes of update
distribution are available – the automatic and manual:
z
Automatic Mode (the Automatic Mode field is checked)
This mode requires AVG DataCenter support (so the mode is not accessible
when AVG TCP Server is used only for update management).
AVG TCP Server gets the clients’ (or their IP addresses’) list from AVG
DataCenter in the automatic mode and sends the update command to them.
The principle is the same as for the AVGADMIN application – the command is
stored in AVG DataCenter and a notification is send to the station. When a
station cannot be reached, it will process the command within the next
synchronization with the AVG DataCenter database.
z
Manual Mode (the Automatic Mode field is not checked)
Define specific IP addresses of AVG clients for update distributions in the
manual mode. You can divide your clients into two groups, when you want to
define different rules for particular clients. This mode can be used even if
there is no AVG DataCenter support.
The fields for each group are as follows (the X stands for the group number):
www.grisoft.com
Copyright (c) 1992-2006 GRISOFT, s.r.o. All rights reserved.