Download AVG Internet Security Network
Transcript
194 AVG Internet Security Network o For every incoming event - By default, an action is triggered for each event occurrence. o Not earlier than … after previous action - It is possible to delay the next action launch by setting a minimum time interval for which the same event is ignored. All the events shown in this interval will then be joined into a group. The next action (e. g. the next e-mail message) will cover an overview of all the grouped events. o Using dynamic limit - In this mode, any triggered action will increase the limit of grouped events n-times. The first virus detection will trigger an action. The same following event will execute no action, it will be grouped instead. On the screenshot above the limit is set to 5, so the next action will be triggered after five successive virus detections. In case of a sixth detection, the limit would be increased 5-times again. After the specified period of time the limit will decrease automatically. This feature allows flexible adaptation to the current situation. It helps to ensure that the administrator is warned immediately in case of a single event; on the other hand it minimizes the chance of network overload in case of an epidemic. c) Events in the AVGADMIN application The administrator can define rules for particular events centrally in the AVG DataCenter using the AVGADMIN application – to reach this dialog, please follow the steps: o AVGADMIN o Settings menu item o Shared settings for stations item o Alert Manager option o Rules tab A list of rules for stations is displayed in the dialog together with some detailed rule information. Double-click the selected rule to open a new rule configuration dialog similar to the client rule configuration dialog. www.grisoft.com Copyright (c) 1992-2006 GRISOFT, s.r.o. All rights reserved.