Download User Manual - EL-CELL

25
26
Inside the glove box: Now screw in the
spring load into the cell base.
Inside the glove box: Before filling the
cell body, close the shut-off valve
clockwise.
27
28
Inside the glove box: Load the syringe
with approx. 1.5 ml of electrolyte and
connect the syringe to the cell body.
Inside the glove box: Pull back the
syringe piston in order to evacuate the cell.
Hold the vacuum for a few seconds. Then
release the piston.
29
30
Inside the glove box: The electrolyte will
be sucked into the cell by the vacuum
applied. Never push the syringe piston!
Then remove the fill line and syringe.
Inside the glove box: Pick up some
lithium with the reference pin. Make sure
that the hole of the reference pin is
completely filled with lithium metal.
User Manual ECD-3-nano – Release 1.0
Page 16 of 32