Download SAS SATA Protocol Suite

600 MB of free hard disk space is required for installation.
Additional disk space is needed for operation of
applications and for storing recorded data in files. As a
rule of thumb, the drive that saves the trace should have
more than 3 times the size of the recorded trace available.
For example, for a 4GB trace, at least 12 GB of disk space
should be available.
Defragmented drives will have better performance. Hard
disks with fast access times, such as SSDs, are
recommended. The hard disk has been shown to have the
most impact on trace save performance.
Display:
To take full advantage of the rich visualization and
analysis of Teledyne LeCroy software it is recommended
that the display is set to at least 1050 lines of vertical
resolution with at least 24-bit color depth.
The minimum requirement for the display is a resolution of
1024x768 with at least 16-bit color depth.
In Windows 7 and up, please use the “Smaller – 100%
(default)” setting under Control Panel -> All Control Panel
Items -> Display.
Connectivity:
To optimize trace saving performance, a Gigabit Ethernet
interface is recommended.
There is no connectivity requirement if the analyzer
application is used only to view pre-recorded traces.
If multiple analyzers are cascaded together, one USB port
(or one Ethernet connection) per analyzer is needed.
Cascaded traces are proportionally larger than traces
captured with a single analyzer.
The time required to save and display larger traces can be
reduced by:
- Using a system with a fast, defragmented SSD or
Hard Disk, with lots of available space.
- Increasing system memory, and
- Using a system with a faster processor.
3. Installation
Please refer to the “Installing your Analyzer” chapter of the
User's Manual for the details of SAS/SATA Protocol
Suite™ software installation.
3.1. DVD Installation
Note: You must install the software before connecting the
Analyzer to the host machine for the first time.
 Insert the installation disc into the host machine's DVD
drive.
 Typically, the installation process will automatically
start. If it doesn't, browse to the 'Autorun' folder on the
installation disc, then double-click the 'autorun.exe'
file.
 Follow the on-screen instructions to complete the
installation.